Alternatively you can email our sales & support team on [email protected]
International Interplate 398
NEA198
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. It is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. International Interplate 398 is intended to pre-prime steel prior to the fabrication process, it can can be overcoated with a large range of coating systems which are suitable for use in a wide spectrum of environments ranging from water immersion, aggressive coastal to rural situations.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A high performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service.
Top Features
High solids, low VOC
Excellent wetting properties
Excellent...
Part of the high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures.
Top Features
Temperature resistant up to 204ºC
Protects steel substrates
Very good flexibility
Excellent overall chemical resistance
Very good abrasion resistance
A high performance two pack epoxy solvent based surface tolerant anti-corrosive primer, specifically developed for ferrous metals which are lightly rusted. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Contains a high level of zinc phosphate anti-corrosive pigment
Flexible and abrasion resistant...
A high-Build zinc phosphate metal primer for new constructions and maintenance. Gives a good corrosion protection, excellent adhesion and increased application tolerance to a wide range of environmental conditions.
Top Features
Excellent corrosion protection
Good chemical & abrasion resistance
VOC compliant to current AIM regulations...
This is a primer from Jotun that can be applied to steel, aluminium or wood, and features very good adhesion properties on all these substrates.
Jotun Pilot QD Primer is an anti-corrosive one component oxidatively drying alkyd coating that is a fast drying, high build, zinc phosphate pigmented product.
International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159.
PPG NovaGuard 4701 is a two-part glass flake vinylester primer for concrete and steel as a holding primer for Novaguard 4801.
Suitable for service temperature >80°C (176°F) when overcoated with NOVAGUARD 4801 dependent on the actual environment.
Mixing ratio by volume: base to catalyst 98:2
From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating.
PPG Sigma EP 112 Miocoat, a two-component general-purpose epoxy buildcoat in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions. Provides good adhesion characteristics for subsequent coats, with excellent durability, and is resistant to temperatures up to 200°C (390°F) in dry...
Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.
Zingaceram HS, a high solid 2 pack intermediate coat to be applied as a sealer over Zinga. The coating has been used on both structural steelwork (for multi-million pound projects) and on sub-sea pipelines.
2 pack system
Seals Zinga with good compatibility
Apply by brush, roller, conventional sprayer or by airless spraying
High solid...
A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.
Top Features
Good for extended exposure demands
Ability to be welded through
Heavy-metal free
Cromadex AQ58 One Pack Waterbased Acrylic Primer is a one pack waterbased acrylic primer for use over a wide range of substrates. Cromadex AQ58 is available in grey and white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours. Life expectancy of up to 3 years in a C2 external environment when...
Nu-Steel QD Primer/Undercoat is a high performance metal primer suited to projects that require a fast turnaround time, for instance for coating railings in a public place.
Advantages
Phosphate-based
Protects against corrosion
Grey and Red Oxide colours
Quick drying
12-month shelf life
Sherwin-Williams Macropoxy K267 (formerly known as Epigrip K267/Transgard TG121) is a two-pack, pigmented with micaceous iron oxide, designed as an intermediate coat in conjuction with Macropoxy high performance primers.
