International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
International Interplate 937
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing.
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts.
International Interplate 937 is suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing thereby reducing secondary surface preparation requirements in comparison to typical zinc silicate products.
- As a shop (pre-construction) primer for the protection of steel during fabrication and assembly.
- Suitable for use with controlled cathodic protection.
- Suitable for use in new construction situations.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Jotun Penguard Special B10 is a two component polyamide cured high molecular weight epoxy coating that contains 65% zinc phosphate pigments by weight. Specially designed as a primer for galvanised steel it can be used as a primer as part of a complete system in atmospheric environments.
A durable and high performance acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for structural steel, as well as other exterior and interior uses. Top Features Smooth, attractive, high build finish Excellent corrosion protection Meets most VOC...
Aesthetically pleasing cathodic protection for damaged galvanised steel. A fast drying, zinc rich coating based on an epoxy ester resin, this Rust-Oleum product contains pure zinc and aluminium as pigments and provides cathodic protection. Zinc coating with sparkling aluminium particles Resists 340 hours of salt spray testing (DIN 50021...
A high performance two pack epoxy solvent based surface tolerant anti-corrosive primer, specifically developed for ferrous metals which are lightly rusted. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Contains a high level of zinc phosphate anti-corrosive pigment Flexible and abrasion resistant...
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. It is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
Jotun Penguard WF is a two component, anticorrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors. It is specially designed for new construction where fast dry to handle and over coating times are required. Jotun Penguard WF can be used as primer, mid coat, finish coat or as single coat...
A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...
A high solids corrosion resistant primer or intermediate coat over steel and inorganic zinc primers. Top Features Excellent corrosion protection Good abrasion resistance Cures down to 40°F
Teamac Rust Converter is an excellent product to stop the rusting process and allow rusty surfaces to be overcoated: Easy to apply, and ideal for marine and industrial applications Can be applied to rust in existing damp conditions Suitable for rusted iron or steel Application by brush, roller or airless spray To be overcoated with a...
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
With a proven 21 years' track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anti-corrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structures
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.