Alternatively you can email our sales & support team on [email protected]
International Interzinc 42
EPA048 EPA043
International Interzinc 42 is a two component, metallic zinc primer designed for use in maintenance situations and as a primer at new construction. To be used as part of a coating system for structures in aggressive environments in a wide range of industries.
International Interzinc 42 is a two component, metallic zinc primer. Intended for use as a zinc primer for application as part of a coating system for structures in aggressive environments in a wide range of industries, including offshore facilities, petrochemical plants, pulp and paper mills, bridges and power plants. International Interzinc 42 has been designed for use in maintenance situations and as a primer at new construction.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A fast drying modified alkyd anti-corrosive primer for use as a general-use fast drying prefabrication or system primer on properly prepared ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004
Advantages
Protects against corrosion on properly prepared steel
Pigmented with zinc phosphate
Touch dry in as little as an...
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing....
Macropoxy 267 (formerly known as Sherwin-Williams Macropoxy C267V3 and as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Macropoxy 267 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and...
A metal primer for ferrous metals such as iron and steel that offers sound anti-corrosion properties and superb capacity and coverage. Can be used over existing paintwork.
Examples of Use
Bridges
Metal artwork
Metal trusses
Warehouses
Factories
Carboline Carboguard 893 SG MIO is a versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers.
Top Features
Economical fit for use epoxy
Used as a primer or intermediate coat
Can be applied over power tool cleaned...
A high-build epoxy mastic coating used for atmospheric exposed and submerged steel.
Top Features
Excellent film build and edge protection
Surface tolerant characteristics
Cures at low temperature
PPG Dimetcote 9, an anticorrosive primer for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion.
2 component anti-corrosion primer
Moisture-curing zinc (ethyl) silicate coating for structural steel
Withstands substrate temperatures from –90°C...
Sherwin-Williams Macropoxy C401 (formerly known as Epigrip C401) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide for use as an undercoat in conjunction with Sherwin-Williams Macropoxy high performance primers. Provides corrosion protection in a single coat, Network Rail approved.
Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. From Jotun, this is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments.
Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.
Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...
A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats.
Top Features
Low odor and low VOC
Good chemical resistance
Used as a primer, intermediate, or finish...
SikaCor EG 1 Rapid is a fast drying version of the standard SikaCor EG 1. It is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. It is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospherical conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.
A heavy duty, high build primer or intermediate coating for protection of steel in corrosive environments. Can be used on aluminium and galvanization.
Top Features
Fast overcoatable with 2K topcoats
Excellent anti-corrosive properties
Excellent flowability, also at low DFT
Very good abrasion resistance
Ken-Kromik 489 (formerly known as Sherwin Williams L489 and as Leighs L489) is a highly protective alkyd anticorrosive primer pigmented with minimum 40% zinc phosphate, used as an anticorrosive spraying or brushing primer for steel.
