This is a primer from Jotun that can be applied to steel, aluminium or wood, and features very good adhesion properties on all these substrates. Jotun Pilot QD Primer is an anti-corrosive one component oxidatively drying alkyd coating that is a fast drying, high build, zinc phosphate pigmented product.
Sherwin-Williams Dura-Plate UHS Primer
Sherwin-Williams Dura-Plate UHS Primer with Opti-Check OAP (Optically Activated Pigments) technology is a specially designed primer for use under Sherwin-Williams Dura-Plate UHS. Sherwin-Williams Dura-Plate UHS Primer is ideal for use over prepared steel or concrete surfaces in industrial and marine exposures.
Sherwin-Williams Dura-Plate UHS Primer with Opti-Check OAP (Optically Activated Pigments) technology is a specially designed primer for use under Sherwin-Williams Dura-Plate UHS. Sherwin-Williams Dura-Plate UHS Primer is ideal for use over prepared steel or concrete surfaces in industrial and marine exposures such as;
- Meets MIL-PRF-23236, Type VII, Class 5, 7, 9 and 11, Grade C
- Ballast tank interiors
- Potable water tanks and pipes (Certifi ed to NSF/ANSI 61)
- Oil storage tank interiors, and refi ned fuel storage tank interiors
- Water and waste treatment plants
- Containment areas
- Suitable for use with cathodic protection systems
- Blue contains OAP fl uorescent pigment (NSF Approved)
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 9.8m² per litre
- Touch Dry
- 5 Hours
- Brush, Roller, Spray
Be the first to ask a question about this product!
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments. Recommended for offshore environments, refineries, power...
A specially designed primer from Jotun with 90% zinc dust content for highly corrosive environments where extended durability is required. It is a very high zinc dust containing product that provides excellent corrosion protection as part of a complete coating system and is to be used as primer in atmospheric environments.
Macropoxy 267 (formerly known as Sherwin-Williams Macropoxy C267V3 and as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Macropoxy 267 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and...
International Interlac 497 is a one pack alkyd undercoat for use on internal and external areas above water on marine vessels. International Interlac 497 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Cromadex 850 Two Pack Non-Isocyanate Acrylic Primer is a two pack non-isocyanate acrylic primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. Formulated without isocyanate helping to reduce health and safety concerns. Cromadex 850 can be applied wet-on-wet giving improved...
Sherwin-Williams Macropoxy M400 (formerly known as Epigrip M400) is a 2-pack epoxy zinc phosphate primer, used as an anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning.
Jotun Barrier Smart Pack is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use and reduced wastage. Designed for brush and roller application, makes it ideal for maintenance and touch up. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates.
Sherwin-Williams Zinc Clad M501 is a 2-pack epoxy zinc rich anti-corrosive primer, providing anti-corrosive protection of steel surfaces prepared by abrasive blast cleaning. It may also be used as a repair primer for galvanized surfaces.
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating.
Jotun Penguard Special B10 is a two component polyamide cured high molecular weight epoxy coating that contains 65% zinc phosphate pigments by weight. Specially designed as a primer for galvanised steel it can be used as a primer as part of a complete system in atmospheric environments.
International Interplate 855 is a fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray used as a temporary protective primer for the coating of steelwork prior to the fabrication process.