Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Jotun Penguard Express CF is a two component polyamide cured, colour stable epoxy primer/finish coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required.
Jotun Penguard Express CF is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. It can be used as primer, mid coat or finish coat in atmospheric environments and is specially designed for new construction where fast dry to handle and over coating times are required. Jotun Penguard Express CF is suitable for properly prepared aluminium, carbon steel, galvanised steel, shop primed steel and stainless steel substrates.
Jotun Penguard Express CF is is typically used for structural steel and piping to be exposed to corrosive environments. Recommended for power plants, airports, buildings, refineries and mining equipment.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Coo-Var Anti-Corrosive Red Oxide is a strong alkyd-based red oxide product designed to be applied direct to metal surfaces. It is a general purpose primer and finish in one coat. ADVANTAGES Primer and finish in one Can be over-coated at a later date Apply direct Protects and decorates Rapid dry version available
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments. Recommended for offshore environments,...
An all-in-one primer and undercoat that is the perfect preparation for Blackfriar Metal Paint.
Jotun Penguard Midcoat MIO is a two component polyamide cured epoxy coating that is a micaceous iron oxide (MIO) pigmented, high solids, high build product. Designed as a mid coat in systems for new construction in atmospheric environments. Suitable in approved coating systems.
Used as an intermediate coat on steel or concrete in a three coat system, and can be topcoated with several generic types of topcoats. Excellent abrasion resistance and flexibility with good chemical resistance. Top Features Single component Fast drying Low VOC
Jotun Penguard Express ZP is a two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric...
Jotun Penguard HSP is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. This Jotun product can be used as a primer or mid coat in atmospheric environments, specially designed for new construction where fast dry to handle and over coating times are required.
Offers excellent substrate ‘wetting’ properties making it suitable for hand prepared steel as well as blast cleaned steel. Provides good chemical and solvent resistance, with high film builds achievable in just one coat.
Rust-Oleum Universal Special Metals Primer is a special primer designed to to be applied to non-ferrous and galvanised metal prior to the application of Rust-Oleum Universal All-Surface Paint.
Cromadex 750 Two Pack Epoxy Primer is a two pack epoxy primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. The product can be air dried or stoved giving flexibility in production. It is available in white and grey as standard, it can also be tinted to ensure...
Rust-Oleum 3202 Galvinoleum Primer is a single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces. Should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Only intended for brush application and can be recoated with Rust-Oleum 7500 Alkythane.
Nu-Flame HB Metal Primer is ideal for priming cast iron and structural steel in preparation to apply the Nu-Flame Fire Retardant System for metals. Advantages Quick dry. Ideal for cast iron and structural steel. 8m²/Litre coverage. 3 colours available. 12-month shelf life.
International Interzinc 52 (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
Cromadex Monozinc One Pack Zinc-Rich Primer is a one pack, zinc-rich primer. Based on epoxy ester resin it is heat resistant to 400°C. It provides galvanic protection to new steelwork and can also be used to repair two pack zinc-rich primers. Monozinc contains more than 90% Zinc in the dry film.
International Interplus 256 is a low VOC, two component internally flexibilised high build surface tolerant epoxy primer. It is pigmented with aluminium and lamellar micaceous iron oxide for improved corrosion resistance and represents the second generation in surface tolerant technology.
For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Top Features Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces. Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity. High zinc...
