Sherwin-Williams Macropoxy L674
  • Sherwin-Williams Macropoxy L674

Sherwin-Williams Macropoxy L674

L674

Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.

Colour
Size
Finish
£66.34
VAT excluded

£79.61 Tax incl.
Quantity

Description

Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.

Recommended Use

  • Quick drying anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning.
  • Suitable for use in conjunction with cathodically protected steel.
  • Suitable for overcoating with most paints in common use except high content metallic zinc products.
  • Suitable as a primer for use over degreased/abraded or blast cleaned aluminium 

Endorsements

  • Network Rail Item No. 7.1.2 

Recommended Systems

Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2, Acrolon C237 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.

For overcoating with alkyd systems consult Technical Team for advice. 

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
L674

Data sheet

Application
Brush, Roller, Spray
Touch Dry
12 minutes
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

International Interzinc 22

International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...

Price £433.05
In stock

Rust-Oleum Hard Hat 2117/1017 Galva Zinc Alu

Aesthetically pleasing cathodic protection for damaged galvanised steel. A fast drying, zinc rich coating based on an epoxy ester resin, this Rust-Oleum product contains pure zinc and aluminium as pigments and provides cathodic protection.

Price £9.37
In stock

Jotun Barrier Plus

This Jotun Paints product is a high solids, very high zinc dust content primer for highly corrosive environments and can be applied down to 0°C surface temperature. Jotun Barrier Plus is a two component polyamine cured zinc rich epoxy coating.

Price £146.04
In stock

Tor Torfab TP Etch Primer (Chromate Free)

Tor Torfab TP Etch Primer (Chromate Free), a 2-part pre-treatment primer for non-ferrous metals such as aluminium, galvanising, copper, brass, etc. The primer is capable of being overcoated with a wide variety of single pack and two pack products and be overcoated after 4 hours (at 20ºC). Good coverage - up to 14 square metres per litre...

Price £85.99
In stock

Bradite Fastrac Rust Converter

A high performance single pack water based rust converter for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Converts low level corrosion to an inert substrate for painting Suitable for...

Price £31.50
In stock

Carboline Carboguard 893 MIO

A high solids corrosion resistant primer or intermediate coat on concrete, steel and (in)organic zinc primers. Top Features Excellent corrosion protection. Excellent film build and edge protection. VOC compliant to current AIM regulations.

Price £81.00
In stock

Sherwin-Williams Macropoxy M905

Sherwin-Williams Macropoxy M905 (formerly known as Epigrip M905) is a low temperature curing, two pack epoxy high build undercoat, capable of curing down to 0°C.

Price £74.99
In stock

Carboline Carboguard 893 SG

A metal primer with surface tolerant properties, can also be used as an intermediate coat, or self-priming finish over steel and zinc primers.  Top Features Ready to apply after mixing Economical fit for use epoxy Used as a primer, intermediate, or finish coat VOC compliant to current AIM regulations

Price £68.63
In stock

International Interprime 306

International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.

Price £38.34
In stock

Teamac Zinc Rich Primer

A cold galvanising paint with a very high concentration of metallic zinc providing cathodic protection and is suitable for bare iron and steel to provide the best corrosion proteciton.

Price £34.27
In stock

International Interzinc 52 (Winter Grade)

International Interzinc 52 (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. 

Price £340.89
In stock

Jotun Penguard WF WG

Jotun Penguard WF WG is a 'Wintergrade' version of Jotun Penguard WF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Penguard WF WG is a two component, anti-corrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors.

Price £182.70
In stock

PPG Sigma EP 159 Sealer

PPG Sigma EP 159 Sealer is a two-component epoxy sealer, pigmented with aluminium, for metal-sprayed steel. PPG Sigma EP 159 Sealer cures at temperatures down to 5°C (41°F) and is approved by Network Rail RT 98 (item 7.1.1) and registered as Highway Agency item 159. Grey colour Available in 4 litres No induction time 18.0 m²/l...

Price £61.16
In stock

Sherwin-Williams Macropoxy L574

Sherwin-Williams Macropoxy L574 (formerly known as Metagard L574) is a two-pack temporary protective primer for steel surfaces prepared by abrasive blast cleaning.

Price £59.93
In stock