Sherwin-Williams Macropoxy M111

Reference:

Manufacturer:

Sherwin-Williams Macropoxy M111 is a 2-pack epoxy zinc phosphate primer for application to surfaces which have been prepared by wet abrasive blasting. It may also be applied to grit blasted surfaces and for surfaces prepared by UHP water blasting where existing blast profile is exposed. 

Bulk Buy

£79.15 tax excl.

£94.98   tax incl.

Product Description

Sherwin-Williams Macropoxy M111 is a 2-pack epoxy zinc phosphate primer for application to surfaces which have been prepared by wet abrasive blasting. It may also be applied to grit blasted surfaces and for surfaces prepared by UHP water blasting where existing blast profile is exposed. 

Tolerant to application to surfaces which may be damp or wet at the time of application. An acceptable ‘ wet ‘ surface is defined as a surface on which a thin film of moisture is present, but is free from running water, droplets or pooled water. 

Recommended Topcoats

Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. 

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)10.8m² per litre
Touch Dry15 minutes
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable