Sherwin-Williams M600
  • Sherwin-Williams M600

Sherwin-Williams M600

Sherwin-Williams M600 (formerly known as Leighs M600) is a quick drying single pack alkyd anticorrosive primer pigmented with zinc phosphate, used for the protection of steel where speed of drying is important.

Colour
  • Current colour: Light Grey
Choose a colour
Close colour picker
  • Black
  • Light Grey
  • Red Oxide
  • Dark Grey
  • Buff
Size
Finish
£41.86
VAT excluded

£50.23 Tax incl.
Quantity

Description

Sherwin-Williams M600 (formerly known as Leighs M600) is a quick drying single pack alkyd anticorrosive primer pigmented with zinc phosphate, used for the protection of steel where speed of drying is important.

Recommended Topcoats

Indefinitely overcoatable with a wide range of materials, including alkyd, chlorinated rubber and vinyl systems. 

Surface Preparation

Blast clean to Sa21⁄2 BS EN ISO 8501-1:2007. Average surface profile in the range 50-75 microns.

Manually prepared surfaces should be prepared to a minimum standard of ST3 BS EN ISO 8501-1:2007 at the time of coating. Ensure surfaces to be coated are clean, dry and free from all surface contamination. 

Application Conditions & Overcoating

In conditions of high relative humidity, ie 80-85% good ven- tilation conditions are essential. Substrate temperature shall be at least 3°C above the dew point and always above 0°C.

Application at ambient air temperatures below 5°C is not recommended. 

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Typical Coverage (per coat)
5.8m² per litre
Touch Dry
15 minutes
Application
Brush, Spray
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Bradite Surface Tolerant Primer

A high performance two pack epoxy solvent based surface tolerant anti-corrosive primer, specifically developed for ferrous metals which are lightly rusted. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Contains a high level of zinc phosphate anti-corrosive pigment Flexible and abrasion resistant Conforms with parts...

Price £68.89
In stock

Jotun Alkydprimer

Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.

Price £27.11
In stock

Bradite CR Anti-Corrosive Primer

A high performance single pack chlorinated rubber anti-corrosive primer with excellent chemical & water resistance. Dries quick and for application on to suitably prepared ferrous metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.  Advantages Contains zinc phosphate Excellent acid and alkali chemical resistance Can be used...

Price £78.75
In stock

Nullifire PM019 Primer for Blasted Steel Substrates

Nullifire PM019 Primer for Blasted Steel Substrates is an anti-corrosive transport primer for temporary protection of blasted steel substrates, which will be finished with a compatible basecoat. Applied at standard film thickness, the protection in outdoor conditions is limited to approximately 3 months. Within this period of time the finishing coating...

Price £313.56
In stock

International Interzinc 22

International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...

Price £433.05
In stock

Jotun Resist 78

Specially designed as a primer in a coating system where extended durability is required. Jotun Resist 78 is a solid foundation for the optimal performing coating system in the toughest exposures. Click here for more Jotun products.

Price £176.30
In stock

Carboline Carboguard 893 MIO

A high solids corrosion resistant primer or intermediate coat on concrete, steel and (in)organic zinc primers. Top Features Excellent corrosion protection. Excellent film build and edge protection. VOC compliant to current AIM regulations.

Price £81.00
In stock

Bradite Fastrac Rust Converter

A high performance single pack water based rust converter for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Converts low level corrosion to an inert substrate for painting Suitable for...

Price £31.50
In stock

International Intershield 300

With a proven 21 years track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anticorrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structures

Price £339.01
In stock

Sherwin-Williams Macropoxy L574

Sherwin-Williams Macropoxy L574 (formerly known as Metagard L574) is a two-pack temporary protective primer for steel surfaces prepared by abrasive blast cleaning.

Price £59.93
In stock

International Intergard 307

International Intergard 307 is a two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification. International Intergard 307 is intended to be used as a primer or blast primer under high build epoxy coating schemes for new construction.

Price £61.79
In stock

International Interlac 497

International Interlac 497 is a one pack alkyd undercoat for use on internal and external areas above water on marine vessels. International Interlac 497 is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.

Price £32.97
In stock

International Interplus 356

International Interplus 356 is a low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C, 23°F), surface tolerant epoxy primer, metallic pigmented with aluminium and lamellar micaceous iron oxide for increased corrosion resistance.

Price £110.87
In stock

Carboline Carbocoat 1343 Finish

A quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use. Top Features May be diluted up to 20% 24 month shelf life High gloss finish

Price £279.00
In stock