Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
Two pack epoxy
Application by brush or airless spray
Also available in Dark Grey on a made to order basis - please contact us on 0113 2455450 (option 1) or send a message to [email protected] for details
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
Recommended curing temperature is above 10°C. Extended drying times will be observed at lower temperatures. Macropoxy M905 is a recommended alternative for low temperature application and curing.
Endorsements
Highways Agency Item No.116.
Recommended Primers
Transgard TG115
Recommended Topcoats
For overcoating with epoxy products (including self over- coating), the maximum recommended interval is 28 days at 23°C. For overcoating outside this interval, consult Technical Team for advice.
Where a high degree of gloss and colour retention is required overcoat with Transgard TG168 or TG169 within 7 days at a minimum dft of 50 microns. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...