Sherwin-Williams Transgard TG159
  • Sherwin-Williams Transgard TG159

Sherwin-Williams Transgard TG159

Sherwin-Williams Transgard TG159 is a two pack epoxy aluminium pigmented sealercoat and is used as a sealer for aluminium metal spray. 

Colour
Size
Finish
£77.13
VAT excluded

£92.56 Tax incl.
Quantity

Description

Sherwin-Williams Transgard TG159 is a two pack epoxy aluminium pigmented sealercoat and is used as a sealer for aluminium metal spray. 

Endorsements

Highways Agency Item No.159. 

Recommended Topcoats

Indefinitely overcoatable with epoxy systems provided the sur- faces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required, overcoat with Acrolon C137V2 within 7 days at a minimum dft of 50 microns. These overcoating times refer to achievement of optimum adhesion at 23oC and will vary with temperature. 

Application Conditions & Overcoating

Transgard paints should preferably be applied at tem- peratures in excess of 10oC. In conditions of high relative humidity, ie 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3oC above the dew point and always above 0°C.

At application temperatures below 10°C, drying and curing times will be significantly extended, and spraying characteristics may be impaired.
Application at ambient air temperatures below 5°C is not recommended.

In order to achieve optimum water and chemical resistance, temperature needs to be maintained above 10oC during curing.
If it is desired to overcoat outside the times stated on the data sheet, please seek advice of Technical Team. 

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Application
Brush, Spray
Coverage
17.0m² per litre
Touch Dry
1 Hour
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Jotun Penguard HSP

Jotun Penguard HSP is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. This Jotun product can be used as a primer or mid coat in atmospheric environments, specially designed for new construction where fast dry to handle and over coating times are required. Coverage Calculator

Price £116.60
In stock

Carboline Carbomastic 615 AL

An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...

Price £249.75
In stock

Nullifire PM015 Aluminium Epoxy Primer

Nullifire PM015 Aluminium Epoxy Primer is a high-build, low temperature curing modified aluminium epoxy mastic. Nullifire PM015 provides unequaled levels or barrier protection and corrosion resistance over existing finishes and rusted or St2/St3 cleaned steel.

Price £93.87
In stock

Cromadex 903 Two Pack Chromate-Free Etch Primer

Cromadex 903 Two Pack Chromate-Free Etch Primer is a two pack chromate-free etch primer designed for use over a wide range of substrates. It is formulated without the use of zinc tetroxy-chromate helping to reduce health and safety concerns. Cromadex 903 should be used to improve adhesion and corrosion resistance of all systems used over metal...

Price £143.01
In stock

Sika Permacor 2706 EG

Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion.  Tested and official approved primer for Sika Unitherm fire protection systems on steel. Features & Benefits Coating with high mechanical resistance For primed steel, directly on galvanized steel,...

Price £264.27
In stock

HMG Synthetic High Opacity Undercoat

HMG Synthetic High Opacity Undercoat is a 1K alkyd / polyurethane undercoat with superior brushing qualities and excellent obliteration properties. Suitable for large areas due to its ease of application and long wet edge time. Click to jump down to Technical Data

Price £31.91
In stock

Rust-Oleum 9170/9180 Epoxy Metal Primer

Rust-Oleum 9170/9180 Epoxy Metal Primer is a fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal, also ideal for galvanised metal under severe conditions. High build primer for optimal opacity with topcoat 9100 Touch dry after just 1 hour Contains a high amount...

Price £113.85
In stock

Teamac 2 Pack Zinc Phosphate Primer

Teamac 2 Pack Zinc Phosphate Primer, is a two pack, non-toxic, epoxy zinc phosphate primer for application to steel which is clean and free from scale and/or rust. Teamac 2 Pack Zinc Phosphate Primer Finish: Eggshell Coverage: 12 Square Metres Per Litre Suitable For: Steel Click to jump down to Technical Data Coverage Calculator

Price £64.51
In stock

Axalta ViterBond ST200 Epoxy ST Primer

Axalta ViterBond ST200 Epoxy ST Primer, is a surface tolerant two pack epoxy aluminium primer, used as a primer on hand prepared rusty steel and to upgrade sound existing coatings. Use as a rust inhibiting primer on hand prepared steel, or as a high build patch repair primer under most generic coating types. Approved to UK Network Rail...

Price £68.79
In stock

Carboline Carbocoat 1343 Finish

A quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use. Top Features May be diluted up to 20% 24 month shelf life High gloss finish

Price £279.00
In stock

Rust-Oleum 569/580 Quick Drying Metal Primer

Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions, it can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection. Recoatable in just...

Price £20.12
In stock

Hydron Nu-Steel SP Anti-Corrosive Primer/Undercoat

Nu-Steel SP Anti Corrosive Primer/Undercoat is a high performance phosphate primer that is perfect for external metal structures that are exposed to the elements. Advantages High performance primer and undercoat. First class adhesion. 8-10m²/Litre average. 12-month shelf life.

Price £60.64
In stock

Jotun Resist 78

Specially designed as a primer in a coating system where extended durability is required. Jotun Resist 78 is a solid foundation for the optimal performing coating system in the toughest exposures. Click here for more Jotun products. Coverage Calculator

Price £193.93
In stock

Sherwin-Williams Zinc Clad II EU

Sherwin-Williams Zinc Clad II EU is a self-curing solvent based, two component zinc silicate coating for the protection of blast cleaned steel surfaces. It is capable of withstanding temperatures up to 400°C and of curing at temperatures down to 0°C.  Coverage Calculator

Price £110.26
In stock

Jotun Muki Z 2001

An all-round excellent choice for the temporary protection of steel exposed to highly corrosive environments. Muki Z 2001 from Jotun has a solid track record and a reputation built on satisfied customers in a range of industries and countries worldwide. Jotun Muki Z 2001 is a two component inorganic low zinc moisture curing zinc ethyl...

Price £131.60
In stock

Tor Torfab TP Etch Primer (Chromate Free)

Tor Torfab TP Etch Primer (Chromate Free), a 2-part pre-treatment primer for non-ferrous metals such as aluminium, galvanising, copper, brass, etc. The primer is capable of being overcoated with a wide variety of single pack and two pack products and be overcoated after 4 hours (at 20ºC). Good coverage - up to 14 square metres per litre...

Price £90.29
In stock