Alternatively you can email our sales & support team on [email protected]
Nullifire PM015 Aluminium Epoxy Primer
342521/342522
Nullifire PM015 Aluminium Epoxy Primer is a high-build, low temperature curing modified aluminium epoxy mastic. Nullifire PM015 provides unequaled levels or barrier protection and corrosion resistance over existing finishes and rusted or St2/St3 cleaned steel.
Nullifire PM015 Aluminium Epoxy Primer is a high-build, low temperature curing modified aluminium epoxy mastic. Nullifire PM015 provides unequaled levels or barrier protection and corrosion resistance over existing finishes and rusted or St2/St3 cleaned steel.
Features & Benefits
Suitable as a topcoat for most tightly adhered existing coatings.
Excellent choice for field touch-up of zinc-rich primers & galvanized steel
Unique formulation with aluminium flakes provides exceptional barrier protection
VOC compliant to current AIM regulations
Primers
PM015 is self-priming. It may be applied over most tightly adhering coatings as well as inorganic zinc primers. A mist coat may be required to minimise bubbling over inorganic zinc primers.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
342521/342522
Data sheet
Typical Coverage (per coat)
11.5m² per litre at 75 microns, or 6.9m² per litre at 125 microns.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments.
Recommended for offshore environments, refineries, power...
Jotun Penguard Express B12 is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product that can be used as a primer, mid coat, finish coat or as a single coat system. Approved to meet the requirements of UK Highway Agency Item 112 for use on bridges and highway infrastructure.
A metal primer with surface tolerant properties, can also be used as an intermediate coat, or self-priming finish over steel and zinc primers.
Top Features
Ready to apply after mixing
Economical fit for use epoxy
Used as a primer, intermediate, or finish coat
VOC compliant to current AIM regulations
A high build coating for the protection of structural steelwork against corrosion that can be used as either an intermediate, or finish coat in interior and exterior environments.
Coo-Var Anti-Corrosive Red Oxide is a strong alkyd-based red oxide product designed to be applied direct to metal surfaces. It is a general purpose primer and finish in one coat.
ADVANTAGES
Primer and finish in one
Can be over-coated at a later date
Apply direct
Protects and decorates
Rapid dry version available
A fast-drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times.
Top Features
Rapid cure and fast-drying
VOC compliant for most areas
Good for filling properties on rough and pitted steel
A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.
Top Features
Good for extended exposure demands
Ability to be welded through
Heavy-metal free
A high performance, surface tolerant epoxy for metal and concrete that has excellent resistance to water and wastewater exposures.
Top Features
High solids, low VOC
High build (16 mils)
Low temperature cure (20°F)
Fast cure response
This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).
A rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc.
Top Features
Quick drying, White Spirit based alkyd primer
May be topcoated with alkyd paints as recommended
Can be thinned
Nu-Steel TP Primer/Undercoat is a two-part epoxy-based coating for use on properly prepared steelwork, such as bridges, railings, and even metallic artwork.
Advantages
Excellent opacity.
Available in white, grey and buff.
10m²/Litre coverage.
12-month shelf life.
Sherwin-Williams Zinc Clad II EU is a self-curing solvent based, two component zinc silicate coating for the protection of blast cleaned steel surfaces. It is capable of withstanding temperatures up to 400°C and of curing at temperatures down to 0°C.
Sherwin-Williams Macropoxy C425V2 (formerly Epigrip C425V2) is a high build 2-pack epoxy zinc phosphate primer/buildcoat to provide anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. Network Rail and NORSOK approved, ideal for use in internal/external exposed conditions including offshore, petrochemical and sub-sea...
Jotun Penguard Midcoat is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment.
A high solids, high build product designed as a mid coat in systems for new construction in atmospheric environments. Suitable...
A cold galvanising paint with a very high concentration of metallic zinc providing cathodic protection and is suitable for bare iron and steel to provide the best corrosion proteciton.
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
