Nullifire PM018 Primer or Top Seal Epoxy Coating
  • Nullifire PM018 Primer or Top Seal Epoxy Coating

Nullifire PM018 Primer or Top Seal Epoxy Coating

342525/342526

Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures. 

Colour
Size
Finish
£311.85
VAT excluded

£374.22 Tax incl.
Quantity

Description

Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures.

Features & Benefits

  • Excellent immersion performance in both fresh and sea water.
  • Suitable as a rust preventing coating in ballast tanks.
  • Ideal for subsea installations, jackets and other areas prone to condensation.
  • Very good abrasion resistance. 

Endorsements

  • Det Norske Veritas, Standard Testing Classification of Ballast Tank Coatings, rev. 4/2/.
  • IMO Performance Standard for Protective Coatings.
  • NORSOK M-501 System #7 Submerged
  • NS 5417-1998 Norwegian waterpower 

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
342525/342526

Data sheet

Typical Coverage (per coat)
4,9 m² per litre
Application
Brush, Roller, Spray
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

PPG NovaGuard 4701

PPG NovaGuard 4701 applies to concrete and steel as a holding primer for Novaguard 4801 that, when suitable overcoated and depending on the actual environment, is suitable for >80°C (176°F) service temperature. 2-part system (Mixing ratio by volume: base to catalyst 98:2) Glass flake vinylester primer Refer to tables below for...

Price £405.60
In stock

Cromadex 306 Quick Air Dry High Build Primer

Quick Air Dry High Build Primer for blasted and non-blasted steel, a one-pack post-fabrication primer that dries fast for a quick turnaround. Suitable for use in mild to moderate corrosive environments, such as those typically found in commercial buildings, hospitals and schools. Features: Overcoatable with Cromadex 222, 233 & 400 Topcoats ONLY Grey...

Price £46.07
In stock

SikaCor 6630 Primer

SikaCor 6630 Primer is part of the SikaCor 6630 System which is a low-solvent, oxidative drying high-build coating with active corrosion protection pigments based on modified synthetic resin combination. SikaCor 6630 Primer is mainly used in case of manual de-rusting preparation or maintenance is being carried out on existing systems.

Price £203.39
In stock

Rust-Oleum 1060/1080 High Build Metal Primer

Rust-Oleum 1060/1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. It assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.

Price £86.96
In stock

PPG Dimetcote 9

PPG Dimetcote 9, an anticorrosive primer for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion. 2 component anti-corrosion primer Moisture-curing zinc (ethyl) silicate coating for structural steel Withstands substrate temperatures from –90°C...

Price £270.50
In stock

Rust-Oleum Mathys Pegalink Universal Adhesion Primer

Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc.

Price £17.34
In stock

Carboline Carboguard 893 SG MIO

Carboline Carboguard 893 SG MIO is a versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. Top Features Economical fit for use epoxy Used as a primer or intermediate coat Can be applied over power tool cleaned...

Price £91.50
In stock

Bullet Roof Epoxy Primer AC

An epoxy primer excellent anti-corrosion properties this primer is the perfect choice for steel and iron gutters or any other steel/iron surface. Top Features Good anti-corrosion properties Brush or airless spray applicable Application temperature from +5℃ (substrate)

Price £71.56
In stock

International Interplate 937

International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing....

Price £212.80
In stock

Macropoxy 267

Macropoxy 267 (formerly known as Sherwin-Williams Macropoxy C267V3 and as Epigrip C267V3) is a high solids 2-pack epoxy, pigmented with micaceous iron oxide. It is used as an undercoat in conjunction with high performance primers. Macropoxy 267 has excellent resistance to moisture, aliphatic solvents, abrasion, alkali spillage, weather and...

Price £57.48
In stock

Sherwin-Williams Macropoxy 646

Sherwin-Williams Macropoxy 646 is a versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting. 

Price £258.09
In stock

Sherwin-Williams Zinc Clad II EU

Sherwin-Williams Zinc Clad II EU is a self-curing solvent based, two component zinc silicate coating for the protection of blast cleaned steel surfaces. It is capable of withstanding temperatures up to 400°C and of curing at temperatures down to 0°C. 

Price £110.26
In stock

Jotun Penguard Special B10

Jotun Penguard Special B10 is a two component polyamide cured high molecular weight epoxy coating that contains 65% zinc phosphate pigments by weight. Specially designed as a primer for galvanised steel it can be used as a primer as part of a complete system in atmospheric environments. 

Price £146.02
In stock

Sherwin-Williams Macropoxy M902

Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C. 

Price £48.33
In stock

Teamac Metalcote Undercoat

A full bodied, high opacity undercoat suitable for use with Teamac Metalcote Plant Enamel paint, used as a primer or undercoat on bare or previously painted surfaces, gives a matt finish, presents a good surface and enhances topcoat.

Price £16.55
In stock

Sherwin-Williams M600

Sherwin-Williams M600 (formerly known as Leighs M600) is a quick drying single pack alkyd anticorrosive primer pigmented with zinc phosphate, used for the protection of steel where speed of drying is important.

Price £41.86
In stock