Cromadex 230 Stoving Primer Filler is a stoving primer filler containing melamine giving improved durability. The product can be overcoated wet-on-wet enabling rapid application. Cromadex 230 Stoving Primer Filler is available in white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours.
Jotun Barrier Smart Pack
Jotun Barrier Smart Pack is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use and reduced wastage. Designed for brush and roller application, makes it ideal for maintenance and touch up. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates.
Jotun Barrier Smart Pack is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use and reduced wastage. Designed for brush and roller application, makes it ideal for maintenance and touch up. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944-5.
Protective: Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where extended durability is required.
Approvals and Certificates
Pre-qualification testing in accordance with NORSOK M-501, Rev. 6, System 1, suitable for exterior exposure in offshore environment, below 120°C.
Additional certificates and approvals may be available on request.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 5.6 - 11.7m² per litre
- Touch Dry
- 20 Mins
- Brush, Roller, Spray
Be the first to ask a question about this product!
Jotun Penguard Midcoat is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. A high solids, high build product designed as a mid coat in systems for new construction in atmospheric environments. Suitable...
Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C.
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Muki Z 2001 as a great alternative. Offers excellent corrosion protection of steel during normal storage and fabrication, and reduces exposure to fumes during welding and cutting compared with high zinc shop primers. Especially...
A heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation. Very good abrasion resistance.
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
Zingalufer, previously known as Alufer N, an intermediate layer or topcoat for existing layers of Zinga in immersed or chemical environments, such as ship hulls and sewage works, providing a protective seal against salt and chemical exposure. Apply by brush, roller, conventional sprayers or aireless spray One pack system Dry in as little...
Carboline Carboguard 893 SG MIO is a versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. Top Features Economical fit for use epoxy Used as a primer or intermediate coat Can be applied over power tool cleaned...
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is a high quality anti-rust primer for Rust-Oleum CombiColor. The Anti-Corrosion Primer will ensure an even longer anti-rust protection on new or rusted steel surfaces and provides and enhances protection against corrosion.
Jotun Penguard WF WG is a 'Wintergrade' version of Jotun Penguard WF to aid application in lower temperatures and to provide faster drying and curing times. Jotun Penguard WF WG is a two component, anticorrosive water borne epoxy coating that is a versatile, fast drying product containing flash rust inhibitors.
A high-Build zinc phosphate metal primer for new constructions and maintenance. Gives a good corrosion protection, excellent adhesion and increased application tolerance to a wide range of environmental conditions. Top Features Excellent corrosion protection Good chemical & abrasion resistance VOC compliant to current AIM regulations...
Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. From Jotun, this is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments.
An epoxy primer excellent anti-corrosion properties this primer is the perfect choice for steel and iron gutters or any other steel/iron surface. Top Features Good anti-corrosion properties Brush or airless spray applicable Application temperature from +5℃ (substrate)
Aesthetically pleasing cathodic protection for damaged galvanised steel. A fast drying, zinc rich coating based on an epoxy ester resin, this Rust-Oleum product contains pure zinc and aluminium as pigments and provides cathodic protection.
Jotun Tankguard Holding Primer is a two component polyamine cured phenolic/novolac epoxy coating. Designed as a holding primer or primer in a complete tank coating system. It has excellent chemical resistance. Can be used as primer in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...