Cromadex 395 Anti-Corrosive Primer
  • Cromadex 395 Anti-Corrosive Primer

Cromadex 395 Anti-Corrosive Primer

Cromadex 395 Anti-Corrosive Primer is an anti-corrosive primer containing zinc phosphate giving added corrosion resistance for greater durability. It is higher in solids giving superb opacity and coverage. The product has superb flow and levelling giving excellent topcoat appearance and can be used over sound existing paintwork, making it ideal for refurbishment work.

Colour
Size
£76.17
VAT excluded

£91.40 Tax incl.
Quantity

Description

Cromadex 395 Anti-Corrosive Primer is an anti-corrosive primer containing zinc phosphate giving added corrosion resistance for greater durability. It is higher in solids giving superb opacity and coverage.

The product has superb flow and levelling giving excellent topcoat appearance and can be used over sound existing paintwork, making it ideal for refurbishment work.

Cromadex 395 Anti-Corrosive Primer is available in off-white (nr RAL 9002) and black as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours.

Life expectancy of up to 6 years in a C3 (as determined in ISO12944) external environment when used with a suitable Cromadex topcoat. See Extra Life brochure for full details.

Suitable Substrates and Preparation

Degreasing with Cromadex 678 Spirit Wipe is recommended and should be carried out after any abrasion of the surface.

Steel: Degrease and abrade with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2.

Aluminium & Galvanised Steel: Degrease and abrade with P240 to remove surface oxide layer. Apply Cromadex 903 Chromate-Free Etch Primer.

Sound existing paint work: Dry sand using P320-P240

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Application
Spray
Touch Dry
30 mins
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

International Interprime 539

International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Intended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.

Price £57.50
In stock

Carboline Carboguard E 19 Primer

A versatile epoxy primer with excellent resistance to salts, water and alkalies, with very good resistance to mild acids and solvents. Top Features Excellent corrosion resistance Cured film is tough and abrasion resistant Excellent adhesion to aluminium

Price £61.13
In stock

Zinga Zingaceram HS

Zingaceram HS, a high solid 2 pack intermediate coat to be applied as a sealer over Zinga. The coating has been used on both structural steelwork (for multi-million pound projects) and on sub-sea pipelines. 2 pack system Seals Zinga with good compatibility Apply by brush, roller, conventional sprayer or by airless spraying High solid...

Price £105.50
In stock

International Intercure 420

International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.

Price £286.09
In stock

Sika Permacor 2706 EG

Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.

Price £251.69
In stock

Jotun Penguard Express B11

Jotun Penguard Express B11 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.

Price £39.75
In stock

Sherwin-Williams Macropoxy M400

Sherwin-Williams Macropoxy M400 (formerly known as Epigrip M400) is a 2-pack epoxy zinc phosphate primer, used as an anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. 

Price £122.66
In stock

Cromadex 2100 One Pack Universal Primer

Cromadex 2100 One Pack Universal Primer is a one pack primer containing zinc phosphate giving added corrosion resistance for greater durability. It is fast drying helping to improve productivity. It can be air dried or stoved giving flexibility in production. Available in white, grey, red oxide and buff as standard, it can also be tinted to...

Price £63.36
In stock

Rust-Oleum 6400 Fast Drying Shopprimer

A fast drying, solvent based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.

Price £22.38
In stock

Jotun Penguard Midcoat

Jotun Penguard Midcoat is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. A high solids, high build product designed as a mid coat in systems for new construction in atmospheric...

Price £30.71
In stock

Rust-Oleum Hard Hat 2185/1085 Galva Zinc

Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...

Price £9.85
In stock

SikaCor EG 1

SikaCor EG 1 is a two-pack, high-solids, epoxy-based intermediate coat containing micaceous iron oxide. The coating is designed as a mechanically resistant intermediate coat on steel surfaces exposed to atmospheric conditions, hot-dip galvanized steel, zinc-spray, stainless steel and aluminium.

Price £70.52
In stock

Kem-Kromik 155

Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.

Price £39.57
In stock

International Intercure 324

International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977.

Price £85.76
In stock

SikaCor 6630 Primer

SikaCor 6630 Primer is part of the SikaCor 6630 System which is a low-solvent, oxidative drying high-build coating with active corrosion protection pigments based on modified synthetic resin combination. SikaCor 6630 Primer is mainly used in case of manual de-rusting preparation or maintenance is being carried out on existing systems.

Price £203.39
In stock

Jotun Barrier 77

From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating.

Price £124.78
In stock