Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.
Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.
Suitable Substrates and Preparation
Degreasing with Cromadex 678 Spirit Wipe is recommended and should be carried out after any abrasion of the surface
Steel: Degrease and abrade with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Ian Spibey on 2021-06-11 13:21:48 | Question:
What area would a 20 litre ton cover? This is quite important not to be on the product details |
Answer:
The coverage ratio is 10-13m² per ltr, so 200m² per 20ltr tin. This is in the Technical Data Sheet on page two in the Physical Properties section. | |
Cromadex 678 Spirit Wipe is formulated to remove all traces of oil and grease from metal surfaces prior to painting. Recommended for manual cleaning where vapour degreasing is not suitable, product is supplied ready for use. More Information
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
