International Intergard 276 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
Cromadex AQ58 One Pack Waterbased Acrylic Primer
Cromadex AQ58 One Pack Waterbased Acrylic Primer is a one pack waterbased acrylic primer for use over a wide range of substrates. Cromadex AQ58 is available in grey and white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours. Life expectancy of up to 3 years in a C2 external environment when used with a suitable Cromadex topcoat.
Cromadex AQ58 One Pack Waterbased Acrylic Primer is a one pack waterbased acrylic primer for use over a wide range of substrates. Cromadex AQ58 is available in grey and white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours.
Life expectancy of up to 3 years in a C2 (as determined in ISO12944) external environment when used with a suitable Cromadex topcoat. See Extra Life brochure for full details.
Suitable Substrates and Preparation
Surfaces should be clean, dry and free from contamination.
Steel: Degrease with Cromadex 678 Spirit Wipe and abrade with P180. If necessary blast clean to remove millscale, minimum surface preparation SA2.
Aluminium & Galvanised Steel: Degrease with Cromadex 678 Spirit Wipe and abrade with P240 to remove surface oxide layer. For even greater system performance apply Cromadex 903 Chromate-Free Etch Primer.
Plastics (ABS): Substrate must be absolutely clean – dirt, stains, grease, moisture etc to be removed. A suitable antistatic cleaner should be used.
Stainless Steel: Degrease with Cromadex 678 Spirit Wipe and abrade with P180.
Wood: Suitable for seasoned softwood only.
MDF: May be directly applied to medium density fibre board. Exterior grades may require abrasion to remove the surface wax coating.
Existing Finish: Degrease with Cromadex 678 Spirit Wipe and abrade existing finishes with P280.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.
Nu-Steel SP Anti Corrosive Primer/Undercoat is a high performance phosphate primer that is perfect for external metal structures that are exposed to the elements. Advantages High performance primer and undercoat. First class adhesion. 8-10m²/Litre average. 12-month shelf life.
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.
PPG SigmaZinc 105 is a two-component, zinc epoxy steel primer with excellent anti-corrosive and application properties. Top Features Quick-drying, can be overcoated after 25 minutes Excellent application properties Cures at temperatures down to -5°C (23°F)
A high solids, epoxy intermediate/finish coat, providing exceptionally high film builds (up to 200 microns DFT per coat), enabling maximum performance in a minimum number of coats. Can be used year round due to its ability to cure down to temperatures as low as 2°C.
Sherwin-Williams Macropoxy L425 is a two-pack epoxy zinc phosphate primer to use as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. Recommended Systems Macropoxy Dura-plate Zinc Clad Epoxy Primers Zinc Clad Epoxy Buildcoats
A fast drying, solvent based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations. Excellent adhesion to metal Ideal for spray application Recoatable with CombiColor and many other coating...
Thermilate Trade Universal Primer is a solvent-borne primer formulated for interior and exterior use, based on an anti-corrosive zinc phosphate pigment and alkyd resin it is suitable for use under a wide variety of conventional finishes, combining excellent adhesion and ease of application.
Sherwin-Williams Transgard TG111V2 is a high build 2-pack epoxy zinc phosphate primer/buildcoat, designed as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning.
Tor HB Micaceous Iron Oxide, a high build anti-corrosive coating for structural steelwork on structures such as cranes, bridges, gantries, tanks, etc. Apply by spray or brush Brush application will only achieve 45 to 70 microns dry film thickness 2 colours available Touch dry in 2 hours Overcoat after 16 hours Micaceous oxide of...
This is a primer from Jotun that can be applied to steel, aluminium or wood, and features very good adhesion properties on all these substrates. Jotun Pilot QD Primer is an anti-corrosive one component oxidatively drying alkyd coating that is a fast drying, high build, zinc phosphate pigmented product.
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Muki Z 2001 as a great alternative. Offers excellent corrosion protection of steel during normal storage and fabrication, and reduces exposure to fumes during welding and cutting compared with high zinc shop primers. Especially...
Nu-Steel QD Primer/Undercoat is a high performance metal primer suited to projects that require a fast turnaround time, for instance for coating railings in a public place. Advantages Phosphate-based Protects against corrosion Grey and Red Oxide colours Quick drying 12-month shelf life
An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...