Nu-Steel High Build Zinc Rich Primer is high quality brushing primer for interior and exterior use giving good adhesion to mild steel surfaces, prior to overcoating with the appropriate finish.
Having a high Zinc content provides excellent first coat protection, and can also be used as a weldable primer
For use on properly prepared steel such as parapet/guard rails and architectural steelwork
Nu-Steel High Build Zinc Rich Primer is high quality brushing primer for interior and exterior use giving good adhesion to mild steel surfaces, prior to overcoating with the appropriate finish.
Features & Benefits
Ideally suited for brush or roller application
High Zinc content
Excellent first coat protection
Can also be used as a weldable primer
For use on properly prepared steel such as parapet/guard rails and architectural steelwork
Coverage rate - 3-5 m² / Litre, calculated on a dry film thickness of 25 microns. Figure may vary according to surface profile and application
Touch dry in 2-4 hours, overcoat in 12 hours, fully cured in 7 days
Product Details
3001-373690
Data sheet
Manufacturer
Hydron
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Solvent
For Use On
Steel
Application Method
Brush, roller, spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Pack Size
2.5L
Coverage
3-5 m² / Litre
Recommended Thinner/Cleaner
T2 Thinners. Conventional thinners and brush cleaners are not effective
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Is this the best product to use before luminescent paint?
Answer from Rawlins’ Technical Team:
Assuming the luminous paint you are looking to use is the Coo-Var system, the substrate is question is metal, it is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend the following system.
Hydron Nu-Steel Zinc Rich Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...