Tor QD High Build Container Coating, a semi-gloss, quick-drying high build anti-corrosive primer finish for blast cleaned or mechanically cleaned mild steel. Use to paint containers/plant and equipment in a single coat application.
Tor QD High Build Container Coating is a semi-gloss, quick-drying high build anti-corrosive primer finish for blast cleaned or mechanically cleaned mild steel, available in over 2,800 colours from the RAL and BS range. The coating can be used to paint containers/plant and equipment in a single coat application by airless spray; this paint can be brushed, but 2 coats may be necessary to achieve the dry film thickness quoted.
The quick-drying formula is touch-dry in 1 hour, ready for overcoating in 4 hours. Please note that Tor QD High Build Container Coating is not suitable for overcoating with 2 pack products.
An alkyd resin binder with zinc phosphate anti-corrosive, together with inert inorganic pigments, and thinned with xylene.
| Product reference | AK736 |
| Volume solids | Approx 44% |
| Typical thickness | 75-100 microns dft from 170-230 microns wet |
| Theoretical coverage | 4.4-5.9 square metres per litre |
| Practical coverage | Reduce theoretical coverage by up to 20% |
| VOC content | EU limit value for this product (cat A/i): 500 g/l. This product contains max 500 g/l VOC |
Steel:
Grit blast to BS4232, 2nd Quality (SA 2.5 Swedish Standard) with a blast profile of 50-75 microns to remove all scale, rust, old paint and contaminants.
Minimum:
Chip scrape and mechanically wire brush to Swedish Standard ST2 for mechanically cleaned steel.
| Mix ratio | N/A |
| Method of application | Airless spray (tip size 0.019”-0.021” and 2000-2400 psi atomising pressure). Can be brushed but two coats may be necessary to achieve the dry film thickness quoted. |
| Cleaner | Tor TH19 |
| Pot Life | N/A |
| Substrate Temperature | Touch Dry | Hard Dry | Overcoating Interval | |
|---|---|---|---|---|
| Minimum | Maximum | |||
| 20°C | 1 hour | 4 hours | 4 hours | Indefinite |
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Store in a safe place out of the reach of children
Flash point
Shelf life
Not suitable for overcoating with 2 pack products.
Brush application will only produce approximately half the recommended film thickness.
Some colours may contain lead pigments.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor QD High Build Container Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting. More Information Delivery Info
£42.61 (incl. VAT)
£35.51 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
