PPG Thinner 20-05
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
In Stock and Available for Delivery
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend PPG SigmaFast 20 as a great alternative.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
PPG Sigmarine 40, an alkyd undercoating for alkyd paint systems with excellent flow, giving a smooth, semi-gloss appearance that can be recoated with various one component products. Formulated for maintenance work, with good drying properties even at low temperatures.
Features & Benefits
- Suitable in alkyd paint systems
- Recoatable with various one component products
- Especially formulated for maintenance work by brush or roller
- Good adhesion to anticorrosive primers and old paint systems
- Easy application by brush with excellent flow, giving a smooth, semi-gloss appearance
- Good drying properties even at low temperatures
- Not suitable for zinc primed steel
| Reference | Colour | Size | Gloss Level |
|---|---|---|---|
| 136706 | White | 5 litres | Semi-Gloss |
| 249750 | RAL & BS colours | 5 litres | Semi-Gloss |
Product Data
| Data for mixed product at 20°C (68°F) | |
|---|---|
| Number of components | One |
| Mass density | 1.2 kg/l (10.0 lb/US gal) |
| Volume solids | 45 ± 2% |
| VOC (Supplied) | Directive 1999/13/EC, SED: max. 339.0 g/kg |
| max. 412.0 g/l (approx. 3.4 lb/US gal) | |
| Recommended dry film thickness | 35 µm (1.4 mils) |
| Theoretical spreading rate | 12.9 m²/l for 35 µm (516 ft²/US gal for 1.4 mils) |
| Dry to touch | 2 hours |
| Overcoating Interval | Minimum: 16 hours |
| Maximum: Unlimited | |
| Shelf life | At least 24 months |
Surface Preparation
Recommended Substrate Conditions and Temperatures
Substrate conditions
- Suitable primer must be dry and free from any contamination
- Existing coating must be compatible, even, dry and free from any contamination
- Not suitable for zinc primed steel
Substrate temperature and application conditions
- Substrate temperature during application should not exceed 50°C (122°F)
- Substrate temperature during application should be at least 3°C (5°F) above dew point
System Specification
- Systems for Superstructure and Deck Fittings - system sheet 3104
- Systems for Interior(s) - system sheet 3105
Application
Instructions for Use
- Stir well before use
- The temperature of the paint should preferably be above 15°C, otherwise extra thinner may be required to obtain application viscosity
- Adding too much thinner results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing (please refer to information sheets information sheet 1433 and information sheet 1434
Air spray
Recommended thinner
Volume of thinner
- 15 - 20%, depending on required thickness and application conditions
Nozzle orifice
- 1.8 – 2.0 mm (approx. 0.070 – 0.079 in)
Nozzle pressure
- 0.4 MPa (approx. 4 Bar; 51 p.s.i.)
Airless spray
Recommended thinner
- Thinner 20-05
Volume of thinner
- 5 - 10%, depending on required thickness and application conditions
Nozzle orifice
- Approx. 0.43 mm (0.017 in)
Nozzle pressure
- 15.0 MPa (approx. 150 bar; 2176 p.s.i.)
Brush/roller
Recommended thinner
- Thinner 20-05
Volume of thinner
- 0 - 2%
Cleaning Solvent
- Thinner 20-05
Safety Precautions
- This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes
References
- Conversion Tables (information sheet 1410)
- Explanation to product data sheets (information sheet 1411)
- Safety Indicators (information sheet 1430)
- Safety in Confined Space and Health Safety, Explosion Hazard - Toxic Hazard (information sheet 1431)
- Safe Working in Confined Spaces (information sheet 1433)
- Directives for Ventilation Practice (information sheet 1434)
- Relative humidity - Substrate Temperature - Air Temperature (information sheet 1650)
Product Details
7213
Data sheet
- Manufacturer
- PPG
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, roller, spray
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed, Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Solvent
- Alkyd
- Mixing Ratio
- -
- Key Features
- can be recoated with various one component products, with good drying properties even at low temperatures.
- Touch Dry (at 20°C)
- 2 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 16 hours
- Fully Cured (at 20°C)
- -
- Pot Life (at 20°C)
- -
- Coverage
- 12.9 m²/l for 35 µm (516 ft²/US gal for 1.4 mils)
- Recommended Thinner/Cleaner
- Thinner 20-05
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- Various one component products
- Max. Application Temperature
- 50°C (122°F)
- Min. Application Temperature
- -
- Density
- 1.2 kg/l (10.0 lb/US gal)
- Solids by Volume
- 45 ± 2%
- Heat Resistance (up-to)
- -
- VOC
- Directive 1999/13/EC, SED: max. 339.0 g/kg max. 412.0 g/l (approx. 3.4 lb/US gal)
- Shelf Life (Once Opened)
- At least 24 months
- UN Number
- UN3082
- Brand
- PPG
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG Sigmarine 40 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like