HMG HB48 Primer

    PRI48
    HMG4427

    HMG HB48 Primer is an alkyd based, quick drying primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate.

    • Suitable for structural steelwork, chassis, steel fabrication, mild steel, shot blasted steel, aluminium & galvanised steel
    • Easy to apply without fear of runs or sags at high wet film thickness
    • Available in 5 colours
    • Quick-drying: Hard dry in 3 hours
    • Suitable for use under HMG QAD Enamel
    • 3,500+ colours available in RAL, NCS, British Standard shades

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish

    £47.08 (incl. VAT)

    £39.23 (ex. VAT)

    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Click To Jump To Section:




    Features & Benefits


    • Quick drying - touch dry in 20-30 minutes at 20⁰C
    • Coverage: 10m²/L at 20 microns DFT
    • Available in 5 colours
    • Suitable for use under HMG QAD Enamel
    • Manufactured under the auspices of an ISO 9001 management system



    Product Specification


    • Volume Solids: 55%
    • Thinner: HMG Thinner 2621 - Compliant Spray up to 5%/Airless RFU
    • Flashpoint: 38⁰C
    • Volume Solids: 55%
    • Maximum VOC (RFU): <450g/L
    • Recoat/Overcoat: After 1 Hour at 20⁰C

    • HMG data sheets (see section above) indicate a dry film thickness that will be achieved when applying a particular wet film thickness
    • These values are a guide only and are not to be used as specifications
    • Film thickness will vary depending on actual use and specification
    • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness



    Drying Times


    Drying Times At 20°C
    Touch Dry:20 - 30 minutes
    Hard Dry:3 hours
    Full Dry:24 hours

     

    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
    • Read and follow the safety data sheet, product data sheet and label instructions
    • Stir all paints thoroughly before use
    • Always use the same batch number on the same job
    • Check colour & sheen
    • Filter the product immediately before use
    • Reduce emissions and maintain quality by replacing tin lid after use

    Substrates: HMG HB48 Primer is suitable as a primer coat for suitably prepared metals, clean and free of grease, oils and other contaminants.
    Not suitable for coating over bitumen or chlorinated rubber coatings.

    Application Climate: Substrate temperature should be 5⁰C or above for application and during cure, and a minimum of 3⁰C above the dew point. Adequate dry air ventilation should be supplied during drying.

    Application Information: Thinning should only take place after material is thoroughly mixed. Application and use should always conform with the codes of practice described in BS 6150 and BS 5493.

    Surface Preparation: Ensure surfaces are clean, dry and free from grease, oils, dust and other contamination prior to application.
    Thoroughly clean and degrease using suitable:

     

    Bare Substrates:

    • Mild Steel – Remove millscale and thoroughly degrease using suitable HMG Prep Clean - abrade with P80 – P180 if necessary, prior to application of primer
    • Shot Blasted Steel – Remove all traces of blast grit/sand prior to application of primer
    • Aluminium – Abrade with P180 – P320, degrease with suitable HMG Prep Clean prior to application of primer
    • Galvanised Steel – Degrease with suitable HMG Prep Clean, apply HMG Mordant Wash, apply HMG Etch Primer and if required use appropriate HMG Primer

    Previously Painted:

    • High pressure wash to remove all loose debris and poorly adhered previous coatings to remove all salts and other contaminants
    • Degrease using suitable HMG Prep Clean 2800 to remove grease and oils not removed with pressure washing alone
    • Existing coatings to be well adhered with all edges tight and well feathered Rust/corrosion to be removed back to clean metallic appearance
    • Abrade to provide good adhesion
    • Wipe over with degreaser to remove loose debris from abrasion
    • Substrate to be clean, free of grease, oils, dust and completely dry prior to application

    For further information on mixing ratios please contact Rawlins Paints Technical - 0113 2455450 (option 2) or [email protected]



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use
    • Suitable respiratory equipment should be worn when spraying
    • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting lid

     

    Product Details
    4427-1004415

    Data sheet

    Manufacturer
    HMG Paints Limited
    Water / Solvent Based
    Solvent
    For Use On
    Structural Steel
    Chassis
    Steel Fabrication
    Mild Steel
    Shot Blasted Steel
    Aluminium
    Galvanised Steel
    Application Method
    Spray
    Sheen
    Matt
    Colour
    Standard / Ready Mixed
    Single, Two or Three Pack
    Single
    Pack Size
    5L
    15L
    Base Type
    Alkyd based
    Key Features
    Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc. It is easy to apply without fear of runs or sags at high wet film thickness.
    Touch Dry (at 20°C)
    20 - 30 Minutes
    Dry to Handle (at 20°C)
    3 Hours
    Fully Cured (at 20°C)
    24 hours
    Coverage
    10m² per Litre
    Recommended Thinner/Cleaner
    Thinner 2621
    Solids by Volume
    55%
    VOC
    0.450 Kg/l
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers
    Recommended Dry Film Thickness
    39-121 μm
    Recommended Wet Film Thickness
    70-220 μm
    UN Number
    UN1263
    Colour(s)
    Standard Colours
    Base Type
    Alkyd
    Base Type
    Solvent-Based
    Suitable For Use On
    Steel
    Suitable For Use On
    Structural Steel
    Suitable For Use On
    Steel Fabrication
    Suitable For Use On
    Shot Blasted Steel
    Suitable For Use On
    Aluminium
    Suitable For Use On
    Galvanised Steel
    Suitable For Use On
    Chassis
    Suitable For Use On
    Mild Steel
    Finish
    Matt
    Application Method
    Spray
    Manufacturer
    HMG Paints LTD
    Usages
    Atmospheric
    Usages
    Zinc Phosphate
    Usages
    High Build
    Usages
    Anti-Corrosive
    Product Usage Type
    Primer
    Colour Family
    Red
    Colour Family
    White
    Colour Family
    Grey
    Colour Family
    Black
    Dry to Recoat (@ 20-25°C)
    60 mins
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG HB48 Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG QAD Enamel

    HMG QAD Enamel is an industrial, durable, high gloss, tough alkyd for use on spray applied steel, railings, exterior furniture and fencing plus other suitable prepared metals.Quick drying - touch dry in 30 minutes Coverage: 11-12m² per litre at 20 microns dft, 10-12 m² per litre at 55 microns dft Can be applied to mild, galvanised and...

    Price £16.48 (ex. VAT)

    £19.78 (incl. VAT)

    £16.48 (ex. VAT)

    In Stock and Available for Delivery

    HMG Mordant T Wash

    HMG Mordant T Wash is designed for use as an etching solution for galvanised steel &amp; zintec.Manufactured to a formulation originally developed by the British Rail Board Click to jump down to Technical DataCoverage Calculator More Information Delivery Info

    Price £37.76 (ex. VAT)

    £45.31 (incl. VAT)

    £37.76 (ex. VAT)

    In Stock and Available for Delivery

    HMG Chromate Free Etch Primer

    HMG Chromate Free Etch Primer is a quick drying chromate free etch primer providing good anti corrosive properties and excellent adhesion to ferrous and non-ferrous metals. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator when used as a wash primer:2-Pack System DetailsBase...

    Price £83.90 (ex. VAT)

    £100.68 (incl. VAT)

    £83.90 (ex. VAT)

    In Stock and Available for Delivery

    HMG Prep Clean 2802

    HMG Prep Clean 2802 is a fast evaporating, strong Preparatory Cleaning solvent for the heavy duty degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info

    Price £37.36 (ex. VAT)

    £44.83 (incl. VAT)

    £37.36 (ex. VAT)

    In Stock and Available for Delivery

    HMG Prep Clean 2804

    HMG Prep Clean 2804 is a water based preparatory Cleaner for the degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info

    Price £32.94 (ex. VAT)

    £39.53 (incl. VAT)

    £32.94 (ex. VAT)

    In Stock and Available for Delivery

    HMG Prep Clean 2803

    HMG Prep Clean 2803 is a slow evaporating, low odour and mild preparatory cleaning solvent for the degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info

    In stock

    HMG Thinner 2621

    HMG Thinner 2621 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info

    Price £11.14 (ex. VAT)

    £13.37 (incl. VAT)

    £11.14 (ex. VAT)

    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)

    £25.84 (incl. VAT)

    £21.53 (ex. VAT)

    In Stock and Available for Delivery