Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
A fast drying, solvent based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.
Rust-Oleum 6400 Fast Drying Shopprimer is a fast drying primer based on a soya oil alkyd. The products contain rust-inhibitive pigments and are lead and chromate free. It should be applied on cold-rolled, blasted, pickled or slightly rusted steel.
Rust-Oleum 6400 Fast Drying Shopprimer is primarily intended for spray application but may also be applied by brush or roller for touch up or small areas only. It can be recoated with the Rust-Oleum Alkyd Primers/Intermediates and the Rust-Oleum Alkythane 7500 System Topcoat assuring the appropriate protection at light industrial exposures.
Product Information
Please note: Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating.
Blackfriar Red Oxide Metal Primer protects ferrous metals such as steel and iron with a special water-resistant formulation.
Sherwin-Williams Macropoxy 646 is a versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting.
A fast drying, water based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.
Nu-Steel Zinc Rich Primer has been specifically-formulated to prime mild steel surfaces to prepare it for overcoating with the finish of your choosing. Steel with low carbon is termed as mild steel, and such uses of this type of steel include: signs, furniture, fencing, cars and structural steel. Advantages Interior and exterior use. 3-5m²/Litre....
Cromadex 903 Two Pack Chromate-Free Etch Primer is a two pack chromate-free etch primer designed for use over a wide range of substrates. It is formulated without the use of zinc tetroxy-chromate helping to reduce health and safety concerns. Cromadex 903 should be used to improve adhesion and corrosion resistance of all systems used over metal...
A fast drying general use primer/undercoat for metal, ideal for use with other fast drying Teamac topcoats.
A rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc. Top Features Quick drying, White Spirit based alkyd primer May be topcoated with alkyd paints as recommended Can be thinned
Cromadex 2100 One Pack Universal Primer is a one pack primer containing zinc phosphate giving added corrosion resistance for greater durability. It is fast drying helping to improve productivity. It can be air dried or stoved giving flexibility in production. Available in white, grey, red oxide and buff as standard, it can also be tinted to...
Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.
Sherwin-Williams Dura-Plate UHS Primer with Opti-Check OAP (Optically Activated Pigments) technology is a specially designed primer for use under Sherwin-Williams Dura-Plate UHS. It is ideal for use over prepared steel or concrete surfaces in industrial and marine exposures.
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Penguard Universal as a great alternative. Jotun Penguard Plus is a two component amine cured high molecular weight epoxy coating. It is a fast drying, high solids, high build product specially designed as a universal, all round,...
A high solids, epoxy intermediate/finish coat, providing exceptionally high film builds (up to 200 microns DFT per coat), enabling maximum performance in a minimum number of coats. Can be used year round due to its ability to cure down to temperatures as low as 2°C.
Jotun Penguard Express ZP is a two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric...
