Bonda Rust Primer is a resin-based zinc anti-rust coating treatment. It forms a tough skin with a bonded in anti-rust system for a long-term action. It has excellent adhesion to most metals and leaves a primed surface ready to paint with all types of paint.
Stops rusting
Fast drying
Used to stop further corrosion
Leaves a paintable surface after drying, on most metals, including automotive use
Low viscosity material
Can be used in a spray gun without thinning
High penetration for superior corrosion protection
Bonda Rust Primer is a resin-based zinc anti-rust coating treatment. It forms a tough skin with a bonded in anti-rust system for a long-term action. It has excellent adhesion to most metals and leaves a primed surface ready to paint with all types of paint.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
This primer is generally used for application to vehicle bodywork, however assuming the radiator is steel that is clean, dry, sound and prepared as detailed in the technical datasheet, you can apply to a radiator, however we would recommend to apply to a small test area firstly to check for comaptibility.
David Sheppard on 2023-02-18 11:48:53
Question:
Hi. I have found a cast iron hopper dated 1867…! Found it in my local woods. I have wire brushed it down to remove as much rust as possible and is now looking good. Am thinking of applying Bonda primer. Would this work on cast iron. How much do you think I would need. Thinking of just 1 litre tin. Thanks fir your advice.
Answer from Rawlins’ Technical Team:
Assuming the hopper is clean, dry, sound and prepared as detailed in the technical data sheet with as much of the rust removed as possible this could be applied.
The coverage rate for this product is 7m² per litre per coat.
Lionel Thorne on 2023-02-13 17:44:07
Question:
I intend to use Bona Primer as a primer on a Land Rover chassis. In places the chassis is quite rusty and I had intended to first treat that rust with a rust converter such as Ku Rust. I have read somewhere that Bona Primer should be applied direct to the rust and that rust converters should not be used. Is this correct? Many thanks.
Answer from Rawlins’ Technical Team:
Bonda Rust Primer can be applied directly to rust, but that said the rust should be (mechanically) removed/reduced to present as a flat a surface as possible for priming.
We would not recommend the use of a rust converter with this product.
Terry Guy on 2022-11-26 13:27:46
Question:
Can Bonda Primer be use on galvanised steel sheet? Many Thanks
Answer from Rawlins’ Technical Team:
Unfortunately no this is not suitable for application to galvanised steel.
Bonda Rust Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Bonda Rust Primer - Aerosol is a rust prevention primer containing anti-rust zinc. A treatment for rust that leaves the surface ready to paint.A resin based zinc anti-rust coating Forms a tough skin Anti-rust system for a long term action Excellent adhesion to most metals Leaves a primed surface ready to paint with all types of paint...
Rustins Cellulose Thinners are a special blend of pure solvents that will mix with any make of cellulose lacquer. Does not contain any xylol, toluene or any other petroleum derivative and is not classified as a petroleum mixture.Pure solvent For the dilution of cellulose paints and lacquers Used as a cleaner for certain products in the...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...