Rust-Oleum 6400WB Fast Drying Water Based Shopprimer

6469WB.5

Rust-Oleum 6400WB Fast Drying Water Based Shopprimer is an anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.

  • Up to 1 year corrosion protection outside
  • Ideal for construction, storage and transportation
  • Masks construction deficiencies
  • 12 m² per litre (at 35 micron)
  • Ideal for spray application
  • Lead and chromate free 
  • Recoatable with Rust-Oleum CombiColor and other coatings

Colour
Size
Finish
£52.50
VAT excluded

£63.00 Tax incl.
Quantity

Description

Rust-Oleum 6400WB Fast Drying Water Based Shopprimer

Rust-Oleum 6400WB Fast Drying Water Based Shopprimer is a water dilutable acrylic primer with anti corrosive pigments. It can be used on a wide variety of substrates like bare or blasted steel, galvanized (zinc), aluminium, non ferro metals etc; internally and externally. It is intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations.

Rust-Oleum 6400WB Fast Drying Water Based Shopprimer is primarily intended for brush application and can also be applied by roller and spray.

Product Information

  • Up to 1 year corrosion protection outside
  • Ideal for construction, storage and transportation 
  • Masks construction deficiencies 
  • Ideal for spray application 
  • Lead and chromate free 
  • Recoatable with Rust-Oleum CombiColor and other coatings

Technical Data

  • Density: 1,25 ± 0.03 kg/l
  • Gloss Level: Matt
  • Solids content in volume: 35% ± 2%
  • Heat Resistance: 80°C (dry heat)

Drying Times At 20°C/RH 50%

  • Touch dry: 30 minutes (20°C), 1 hour (10°C), 15 minutes (30°C)
  • Dry to handle: 1 hour (20°C), 2 hours (10°C), 30 minutes (30°C)
  • Dry to recoat: 1 hour (20°C), 6 hours (10°C), 1 hour (30°C)
  • Fully cured: 3 days (20°C), 5 days (10°C), 2 days (30°C)

Theoretical Consumption

  • 10 m²/l at 35 µm dry

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Application Conditions

Temperature of air, substrate and coating material between 10 and 35°C and relative humidity below 85%. The substrate temperature must be at least 5°C above dew point.

Please note: Remove grease, oil, alkali residues and all other deposits. Remove loose rust, rust-scale and deteriorated coatings by scraping and wire brushing before application.  Remove zinc salts with SURFAETCH 108 Etching Solution

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
6469WB.5

Data sheet

Manufacturer
Rust-Oleum
Water / Solvent Based
Water
For Use On
Steel, Galvanised Steel, Zinc, Aluminium
Application Method
Brush, Roller, Spray, Airless Spray
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Pack Size
5L
Dry to Handle (at 20°C)
1 Hour
Dry to Recoat (at 20°C)
1 Hour
Fully Cured (at 20°C)
3 Days
Coverage
10m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
10°C
Density
1,25 ± 0.03 kg/l
Solids by Volume
35% ± 2%
Heat Resistance (up-to)
80°C (dry heat)
VOC
14 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. Keep from freezing.
Touch Dry
30 Mins
Recommended Dry Film Thickness
35 µm
Recommended Wet Film Thickness
100 µm
UN Number
Not regulated
Consumption
10 m²/l at 35 µm dry
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum 6400 Fast Drying Shopprimer

Rust-Oleum 6400 Fast Drying Shopprimer is a fast drying, solvent based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations. Excellent adhesion to metal Ideal for spray application...

Price £23.50
In stock

Rust-Oleum CombiColor Original

Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes: Apply to bare, manually derusted or ready primed mild steel Over 400 colour options including RAL, BS & NCS Primer and metal topcoat in one Interior/exterior use Sag resistant - leaves no brush/roller strokes Coverage...

Price £20.67
In stock