Flag Rust Converter is a high performance water based low odour and environmentally friendly primer treatment which neutralises rust and forms a tough black surface. It prevents rust re-occurring and is quick drying and easy to use.
Flag Rust Converter is a high performance water based low odour and environmentally friendly primer treatment which neutralises rust and forms a tough black surface. It prevents rust re-occurring and is quick drying and easy to use.
For interior and exterior use on Ferrous Metals.
Flag Rust Converter is suitable for over-coating with solvent based primers or top coats.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Irfan on 2023-10-26 22:19:23 | Question: Hi, would this be suitable for use on car suspension components, and the entire underbody of the car? I'm thinking of the following method: 1) a wire brush over the suspension parts/underbody 2) sandpaper 3) Rust-Oleum Pre-Paint Cleaner (is this suitable? 4) Flag Rust Converter Aiming to sort my rust problem out Thanks |
Answer from Rawlins’ Technical Team: Assuming you have suitably prepared the areas to be treated in accordance with the techncial datasheet, wire brushing any areas of rust that are flaking/peeling to a minimum st2 standard and wiping the surface down with a damp cloth, this product will be fine for applciation. We wouldn't recommend applying Rust-Oleum Pre-Paint Cleaner as this may be uncompatible with Flag Rust Convertor due to lack of testing. | |
| Roy Horsley on 2023-10-11 13:48:12 | Question: Hi would this product be suitable to treat the inside of a diesel tank |
Answer from Rawlins’ Technical Team: No, Rust Converter is not a suitable product to treat the inside of a diesel tank. | |
| tim on 2023-08-28 13:55:40 | Question: Does the rust converter have shelf life, use by period, once can is opened? |
Answer from Rawlins’ Technical Team: This product doesn't have a confirmed shelf-life. Once opened, if stored in accordance with the manufacturer's instructions and can still be stirred it is fine to use. | |
| Andy Warr on 2022-11-28 16:26:37 | Question: Will your rust converter stick to sound painted surfaces adjacent to the rusted area? |
Answer from Rawlins’ Technical Team: No, this is a treatment for application to bare rusted metals, it should not be applied to areas of paint. | |
| Christopher Pearce on 2022-07-17 15:42:43 | Question: Is this product suitable for use on underwater areas of a narrowboat prior to overcoating with a bitumen based product. |
Answer from Rawlins’ Technical Team: The Flag Rust Converter will be fine to use on a substrate that will be eventually underwater, but the manufacturer have not tested it with a bitumen based product over the top. We would recommend testing for compatibility and adhesion prior to full application. | |
| Mr K Jenkins on 2022-01-28 16:35:03 | Question: Would this rust converter be suitable for treating an internal steel narrowboat drinking water tank? |
Answer from Rawlins’ Technical Team: No, this can be used to convert rust, but as this is a drinking water tank any suitable paint system we stock for this application would require the tank to be blasted prior to application which would make this process redundant. | |
Flag Rust Converter is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
