Rust-Oleum 9169 Epoxy Rust Primer is a low viscous epoxy rust-primer with outstanding adhesion and corrosion protection for manually derusted metals and can be recoated with Rust-Oleum 9100 topcoats.
Can be applied directly to sound rusted surfaces (less work)
Rust-Oleum 9169 Epoxy Rust Primer is a low viscous epoxy rust-primer with outstanding adhesion and corrosion protection for manually derusted metals. Rust-Oleum 9169 Epoxy Rust Primer is designed for application on manually prepared rusted steel surfaces and can be recoated with 9100 topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moist conditions.
Features & Benefits
Applied directly to manually de-rusted steel.
Avoids costly surface preparation
Basis for long-lasting protection
Easy mixing (1:1 ratio)
Penetrates through rust onto sound metal
Economic alternative for blasting
Active corrosion control
Easy to apply by brush, roller or spray
Technical Data
Density: 1,34
Gloss Level: Gloss
Corrosion Class: C4 high protection
Solids content in volume: 58,5 %
Heat Resistance: 150°C (dry heat)
Mixing Ratio: 1 : 1 (Volume)
Drying Times At 20°C/RH 50%
Touch dry: 2 hours
Dry to handle: 4 hours
Dry to recoat: After 16 hours, but within 72 hours
Fully cured: 8 days
Pot Life: 4 hours for a 5 ltr. mix at 20°C
Induction Time: 1 hour
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning to St 2/3 (ISO 8501-01 : 1988). Large areas may be brush-off blasted to Sa 2 (ISO 8501-01 : 1988), blast profile max. 50 µm. Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly, check compatibility. The surface must be clean and dry during application.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
609-181793
Data sheet
Manufacturer
Rust-Oleum
For Use By
Industrial Use
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Solvent
Water / Solvent Based
Solvent
For Use On
Steel
Application Method
Brush, Roller, Spray, Airless Spray
Sheen
Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Single, Two or Three Pack
Two-Pack
Pack Size
5L
Mixing Ratio
1 : 1 (Volume)
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
4 Hours
Dry to Recoat (at 20°C)
After 16 hours, but within 72 hours
Fully Cured (at 20°C)
8 Days
Coverage
11.7m² per litre
Recommended Thinner/Cleaner
RUST-OLEUM Thinner 160
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Solids by Volume
58,5 %
Heat Resistance (up-to)
150°C (dry heat)
VOC
371 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum`s 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.
Strong dilution...
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Rust-Oleum 9100 High Solids Epoxy is a higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application....
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...