Sika Permacor 2706 EG is a 2-pack mio-protective coating based on epoxy resin with high mechanical resistance and outstanding adhesion. Tested and official approved primer for Sika Unitherm fire protection systems on steel.
Ardenbrite Quick Drying Base Coat
A quick drying water based primer/adhesion promoter for use in conjunction with the Ardenbrite Metallic finishes.
Ardenbrite Quick Drying Base Coat is a quick drying water based primer/adhesion promoter. For use in conjunction with the Ardenbrite Metallic finishes.
Features & Benefits
- Quick drying
- Promotes adhesion to difficult substrates
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 10m² per litre
- Touch Dry
- 1-2 Hours
Be the first to ask a question about this product!
PPG SigmaZinc 109 HS is a two-component, high solids polyamide adduct cured zinc rich epoxy primer designed as a system primer for various paint systems. This coating is a very good primer for systems with high solids epoxy buildcoats. Excellent anti-corrosive properties Quick-drying Complies with SSPC-Paint 20 level 2 and ISO 12944.5...
International Interprime 306 is a single component, fast drying, high build alkyd primer used as a shop applied post-fabrication primer specifically designed for a blast, fabricate and prime steel production route, and where fast drying and rapid handling properties are required.
A low-temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish on steel substrates. Top Features Low temperature cure characteristics. Rapid handling for in-shop applications. Low yellowing compared to other epoxies. VOC compliant to current...
Nullifire PM019 Primer for Blasted Steel Substrates is an anti-corrosive transport primer for temporary protection of blasted steel substrates, which will be finished with a compatible basecoat. Applied at standard film thickness, the protection in outdoor conditions is limited to approximately 3 months. Within this period of time the...
A heavy duty, high build coating for protection of steel in corrosive environments. Gives a hard and smooth surface with excellent flexibility. Top Features Excellent immersion performance in water. Suitable as a rust preventing coating in ballast tanks. Ideal for areas prone to condensation. Very good abrasion resistance.
Sherwin-Williams Macropoxy G280 (formerly known as Metagard G280) is a two pack epoxy zinc free prefabrication primer. It is a temporary protective for steel surfaces prepared by abrasive blast cleaning. Suitable for welding, cutting and forming when applied at the recommended dry film thickness.
Nu-Steel Cladding Primer is a modified acrylic primer specifically developed for application for use on aluminium cladding, pre-fab buildings and industrial environments. Also ideal for Plastisol and polyester coated steel. Advantages Acrylic primer solution Excellent resistance to UV 12-month shelf life
A highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all steel and concrete industrial markets Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming VOC compliant to current AIM regulations
Ken-Kromik 489 (formerly known as Sherwin Williams L489 and as Leighs L489) is a highly protective alkyd anticorrosive primer pigmented with minimum 40% zinc phosphate, used as an anticorrosive spraying or brushing primer for steel.
This low odour, high opacity white primer/sealer is suitable for most surfaces including tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plasics (test a small area first).
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.
A high performance, surface tolerant epoxy for metal and concrete that has excellent resistance to water and wastewater exposures. Top Features High solids, low VOC High build (16 mils) Low temperature cure (20°F) Fast cure response
Nu-Steel SP Etch Primer is a single pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems. Advantages Available in Grey and Red Oxide. Excellent adhesion to metals. 12m²/Litre typical coverage. 12-month shelf life.
International Interplus 770 is a low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate coating intended for use as a versatile, high performance maintenance coating to upgrade tightly adhering existing coatings to longer life durable systems.