Teamac Metalcote Undercoat. A full bodied, high opacity undercoat suitable for use with Teamac Metalcote Plant Enamel paint, used as a primer or undercoat on bare or previously painted surfaces, gives a matt finish, presents a good surface and enhances topcoat.
Teamac Metalcote Undercoat, is an interior and exterior, oil based undercoat. It is a high opacity undercoat with good flow characteristics for use with Teamac Metalcote Enamel. It has been designed to reduce topcoat sinkage and to retain a high gloss finish.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50%
Touch Dry:
2 Hours
Dry To Handle:
12 Hours
Dry To Recoat:
12 hours or overnight
Fully Cured:
3 - 5 Days
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants.
Wood should be sanded prior to coating to ensure an adequate "key" is produced.
Apply direct to abraded GRP. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Teamac Metalcote Undercoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Teamac Metalcote Plant Enamel, is a tough, flexible enamel paint with an attractive gloss finish and excellent durability. It has good resistance to lubricating, mineral oils, many common industrial chemicals and heat.
Good resistance to oils, chemicals and heat
Ideal for use on all types of machinery including tractors
Available in...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
Teamac Zinc Phosphate Primer, an anticorrosive primer on iron and steel, for use with a range of conventional topcoats such as Teamac Marine Gloss and Teamac Metalcote Plant Enamel.
Can be used for:
Marine purposes
Fire escapes
Metal gates
Metal garage doors
Ideal in coastal areas
Click to jump down to Technical Data
Coverage...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
