Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer.
Recommended as a primer, intermediate or finishing coat in Hempatex-systems in moderate corrosive environments, suitable as a self-priming repair and touch-up coating for containers as well as other cases where a fast and economic repair job is desired
EC-type examined as a low flame spread material when used as part of a predefined paint system
Complies with US FDA and EU food regulations for contact with liquid and dry foodstuff
Hempatex HI-Build 46410 is a physically drying, high-build coating with good colour retention as a flat finish, based on acrylic resin and non-chlorinated plasticizer.
Note: If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Hempatex qualities are thermoplastic, therefore prolonged direct pressure at temperatures above 40°C may cause film indentations.
Product Certifications
EC-type examined as a low flame spread material when used as part of a predefined paint system
Complies with US FDA and EU food regulations for contact with liquid and dry foodstuff
Approved by CSIRO, Australia for carriage of foodstuffs
Overcoating
Hempel’s specification supersedes any guidelines indicated in the product data sheet. Overcoating times are indicative for products of the same generic chemistry.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Will this paint be suitable for application directly on fiberglass? Resin I have used - Sicomin SR5550 sanded not primed.
Answer from Rawlins’ Technical Team:
While the manufacturer has not tested this product applied to fibreglass, they see no reason why it couldnt be used assuming you test on a small area for compatibility and adhesion prior to full application.
The fibreglass must be clean, dry, sound and prepared as detailed in the technical data sheet.
Mark on 2022-06-15 16:02:28
Question:
I have a painted steel structure, is any surface treatment required prior to coating with this product? or can I apply directly to the paint?
Answer from Rawlins’ Technical Team:
Hempel recommend on their product data sheet this must only be applied to a bare prepared surface or another Hempel product as part of a Hempel specification.
In regards to preparation, for maintance or repair spot abrasive blasting is recommended but minor areas hand or power tool preparation can be used.
For new structures this must be blasted to SA2.5.
Dave on 2022-05-20 15:28:41
Question:
Can hempel tex hi build 46410 paint be used on plywood and timber
Answer from Rawlins’ Technical Team:
While there is no real reason why this cannot be used on timber, the manufacturer does not hold test data for this application.
We would recommend a testing for compatibility and adhesion on a small area prior to full application.
Hempel Hempatex Hi-Build 46410 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Hempel's Thinner 08080 is a thinner for Hempel's Hempatex, Hempaquick, Hempathane topcoats and enamels, Hempel's Antifoulings, Globic and Dynamic, Oceanic and Olympic.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned...
Hempatex Enamel 56360 is a physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention. For professional use only Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils Finishing coat in Hempatex systems in moderately to severely corrosive...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...