Blackfriar Quick Drying Metal Paint has been specially formulated to provide a tough, long-lasting, high gloss finish. It is heat resistant up to 150ºC/300ºF. It can be used inside and outside on metal and wood, and is ideal for factory maintenance such as plant and machinery, as well as around the home. Product Details Interior and...
Blackfriar Anti-Rust Primer
Blackfriar Anti-Rust Primer is a rust inhibiting primer containing Zinc Phosphate for the protection of ferrous metals. Specifically formulated for painting metal surfaces to prevent corrosion. Recommended for use with Blackfriar Quick Drying Metal Paint.
- For ferrous metals.
- Interior and exterior use.
- Excellent rust prevention.
- Easy to apply.
Blackfriar Anti-Rust Primer is an all-in-one primer and undercoat that is the perfect preparation for Blackfriar Metal Paint. It’s easy to apply and provides excellent protection against rust, making it ideal for factory maintenance, including plant and machinery, and for use at home on your car, bicycles, garden furniture, gates, railings and garage doors etc.
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Remove any rust and abrade or wire brush back to a clean bright surface before applying Blackfriar Anti-Rust Primer.
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. For best results we recommend applying by brush, working the paint into the surface profile. Two coats are recommended to give best protection.
Maximum 5% white spirit.
Do not use under cold (less than 5°C), damp or humid conditions. Do not apply to damp or wet surfaces. Not suitable for application to non-ferrous metal, for galvanised metal or other non-ferrous metals use Blackfriar Multi-Surface Primer.
Touch dry in 2 - 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
- Excellent rust-prevention
- Tough and durable
- For ferrous metals
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Blackfriar Professional
- Base Type
- Solvent Based
- Interior/Exterior Use
- Brush, Roller
- Dry to Recoat (at 20°C)
- 16 Hours
- 14m² per litre
- Recommended Thinner/Cleaner
- White Spirit
- Touch Dry
- 2-4 Hours
- Matt Finish
- UN Number
Be the first to ask a question about this product!