Hempadur Fast Dry 15560 is a two-component epoxy paint with a very short drying time. Contains zinc phosphate.

Quick Links - Click To Jump To Section:

   
• Application
• Drying & Overcoating

Application

• For professional use only
• For new build, maintenance and repair
• Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j
• Service temperature, maximum, dry exposure only: 140°C
• Recommended thinner: Hempel Thinner 08450 Cleaner: Hempel Tool Cleaner 99610
• Pot life 2 hours @ 20°C
• Applicable by brush/roller, air spray and airless spray. Nozzle pressure: 175 bar [2500 psi] Nozzle orifice: 0.019-0.021"
• DFT 75-160 micron, WFT 120-250 micron
• Coverage 3.9 m²/-8.2 m²/L
• Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating

If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C

Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness. Overthickness should be closely controlled and never locally exceed 300 micron [12 mils] DFT. On irregular surfaces it is recommended to employ special care in avoiding over application.

Drying & Overcoating

Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.

• Previous coat: None or according to Hempel’s specification
• Subsequent coat: According to Hempel’s Specification. Recommended products are: Hempadur, Hempatex, Hempathane, Hemucryl
• Touch dry in 30 minutes @ 20°C
• Hard dry in 120 minutes @ 20°C

Atmospheric medium

Hempadur Fast Dry 15560

• 4 hours - 90 days @ 10°C
• 120 minutes - 90 days @ 20°C
• 90 minutes - 67 days @ 30°C

Hempathane HS 55610

• 4 hours - 20 days @ 10°C
• 120 minutes - 90 days @ 20°C
• 90 minutes - 7½ days @ 30°C

Hempatex Enamel 56360

• 120 minutes - 16 hours @ 10°C
• 60 minutes - 8 hours @ 20°C
• 45 minutes - 6 hours @ 30°C