A high-Build zinc phosphate metal primer for new constructions and maintenance. Gives a good corrosion protection, excellent adhesion and increased application tolerance to a wide range of environmental conditions. Top Features Excellent corrosion protection Good chemical & abrasion resistance VOC compliant to current AIM regulations...
Teamac Rapidry Primer Undercoat
A fast drying general use primer/undercoat for metal, ideal for use with other fast drying Teamac topcoats.
Teamac Rapidry Primer Undercoat is a fast drying, modified alkyd, general use primer/undercoat for metal. Can be used
as a fast drying primer/undercoat for metal fabrications. Ideal for use with other Teamac Rapidry topcoats.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sherwin-Williams Macropoxy M182 (formerly known as Resistex M182) is a single pack epoxy anti-corrosive primer, used as an oil resisting primer for application onto ferrous substrates.
Cromadex 902 One Pack Etch Primer is a one pack etch primer that can be both air dried and stoved making it suitable for use in most paint shops. The product has enhanced adhesion properties to mild steel ensuring the success of the coating system. Cromadex 902 is available in white, grey and black.
International Interzinc 52 (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
Ken-Kromik 489 (formerly known as Sherwin Williams L489 and as Leighs L489) is a highly protective alkyd anticorrosive primer pigmented with minimum 40% zinc phosphate, used as an anticorrosive spraying or brushing primer for steel.
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
Nu-Steel Cladding Primer is a modified acrylic primer specifically developed for application for use on aluminium cladding, pre-fab buildings and industrial environments. Also ideal for Plastisol and polyester coated steel. Advantages Acrylic primer solution Excellent resistance to UV 12-month shelf life
Nu-Steel One Coat Primer/Topcoat is an anti-corrosive paint with excellent adhesion and durability. Conforms to BS 5493 the code of practice for the protective coating of iron and steel against corrosion. Advantages Up to 5 years protection Dries quick Choose from any RAL colour Anti-corrosive properties 12-month shelf life
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.
Specially designed as a primer in a coating system where extended durability is required. Jotun Resist 78 is a solid foundation for the optimal performing coating system in the toughest exposures. Click here for more Jotun products.
A weldable pre-construction inorganic zinc primer for shop use only. Designed to protect steel during construction phase of projects under normal conditions. Top Features Weld spatter does not adhere to or damage the coating Dries to touch and to handle in 3 to 5 minutes Flat finish
Jotun Penguard Primer is a two component polyamide cured high molecular weight epoxy coating designed as a primer for new construction. It can be used as a primer as a part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel...
International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977.
A metal primer for ferrous metals such as iron and steel that offers sound anti-corrosion properties and superb capacity and coverage. Can be used over existing paintwork. Examples of Use Bridges Metal artwork Metal trusses Warehouses Factories