Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions, it can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection.
Recoatable in just 2 hours
Durable anti-corrosion system in just one day
Excellent flow
Increases life expectancy of the Alkythane topcoat
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions Rust-Oleum 569/580 can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection; e.g. at heavy industrial exposures a two-coat system of 569/580 Quick Drying Metal Primer and Rust-Oleum 9100 High Performance Epoxy; at light industrial exposures Primer Rust-Oleum 1060/1080 High Build Metal Primer and/or a second coat followed by Rust-Oleum 7500 Alkythane.
Features & Benefits
Recoatable after just 2 hours
Durable anti-corrosion system in just one day
Excellent flow
Increases life expectancy of the Alkythane topcoat
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 µm. If blasting is not possible remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1 : 1988). Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface must be clean and dry during application.
Application Conditions
Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
Application & Thinning
BRUSH Dilute up to 10 vol. %; Rust-Oleum Thinner 633. Use natural bristles, long hair brushes. Brush application may require 2 coats to achieve recommended dry film thickness.
ROLLER Dilute up to 10 vol. %; Rust-Oleum Thinner 633. Use medium nap, perlon 8-12 mm. rollers. Roller application may require 2 coats to achieve recommended dry film thickness.
AIRLESS SPRAY If required up to 5 vol. % Rust-Oleum Thinner 641. Pneumatic and electric airless equipment. Tip size: 0.013-0.015 inch. Fluid pressure: 130 - 200 bar.
AIR-ATOMISED SPRAY 10-20 vol.%; Rust-Oleum Thinner 641. Gravity cup and pressure cup. Tip size: 1.2 -1.8 mm. Atomizing pressure: 2 - 4 bar.
Technical Data
Density: 1.2 kg/l Gloss Level: Matt Corrosion Class: C3 average protection Solids content in volume: 44.8% Heat Resistance: 120°C (dry heat)
Drying Times at 20°C/RH 50%
Touch dry: 1 h Dry to handle: 2 h Dry to recoat: After 2 hours Fully cured: 8 days
Theoretical Consumption
12.8m² per litre (80 µm WFT, 35 µm DFT)
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
569.1
Data sheet
Manufacturer
Rust-Oleum
Water / Solvent Based
Solvent
For Use On
Steel
Application Method
Brush, Roller, Spray, Airless Spray
Sheen
Flat
Colour
Standard Colours
Single, Two or Three Pack
Single
Pack Size
1L, 5L
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
2 Hours
Dry to Recoat (at 20°C)
After 2 Hours
Fully Cured (at 20°C)
8 Days
Coverage
12.8m² per litre
Recommended Thinner/Cleaner
Rust-Oleum Thinner 633 - Rust-Oleum Thinner 641
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Solids by Volume
44,8 %
Heat Resistance (up-to)
120°C (dry heat)
VOC
424 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.
Can also be used for the cleaning of some surfaces prior to application of the coating.
Suitable for cleaning of the application tools such as Brushes,...
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.
Can also be used for the cleaning of some surfaces prior to application of the coating
Suitable for the cleaning of the application tools such as Brushes,...
Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems.
Easy to apply, excellent flow and aspect
Extra durable because of polyurethane addition
Available in over 4,100 colour options,...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage