Rust-Oleum 1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. It assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.
Rust-Oleum 1080 High Build Metal Primer
Rust-Oleum 1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. Should be used on new, blasted steel surfaces or on surfaces primed with Rust-Oleum metal primers. Rust-Oleum 1080 High Build Metal Primer assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.
Features & Benefits
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 μm. Sand previous coatings which are in good condition to roughen the surface slightly. The surface must be clean and dry during application.
Application Conditions
Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
Application & Thinning
BRUSH
Up to 10 vol. %; Rust-Oleum Thinner 633.
Use natural bristles, longhair brushes.
ROLLER
Up to 10 vol. %; Rust-Oleum Thinner 633.
Use medium nap, polyamide (perlon 8 -14 mm) rollers. Roller application may require 2 coats to achieve recommended dry film thickness.
AIRLESS SPRAY
Up to 20 vol.%; Rust-Oleum Thinner 641.
Pneumatic and electric airless equipment. Tip size: 0.013-0.015 inch. Fluid pressure: 130 - 200 bar. Check wet film thickness, avoid excessive film thickness.
AIR-ATOMISED SPRAY
10-20 vol.%; Rust-Oleum Thinner 641.
Gravity cup and pressure cup. Tip size: 1.4 -2.2 mm. Atomizing pressure: 2 - 4 bar.
Technical Data
Density: 1.37 kg/l
Gloss Level: Matt
Corrosion Class: C4 high protection
Solids content in volume: 53.5%
Heat Resistance: 120°C (dry heat)
Drying Times at 20°C/RH 50%
Touch dry: 4 h
Dry to handle: 8 h
Dry to recoat: After 24 hours
Fully cured: 8 days
Theoretical Consumption
9m² per litre (105 μm WFT, 60 μm DFT)
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum 1080 HB Metal Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.Can also be used for the cleaning of some surfaces prior to application of the coating Suitable for cleaning of the application tools such as Brushes,...
£74.34 (incl. VAT)
£61.95 (ex. VAT)
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.Strong dilution...
£21.78 (incl. VAT)
£18.15 (ex. VAT)
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray.Can also be used for the cleaning of some surfaces prior to application of the coating Suitable for the cleaning of the application tools such as Brushes,...
£15.54 (incl. VAT)
£12.95 (ex. VAT)
Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems.Easy to apply, excellent flow and aspect Extra durable because of polyurethane addition Available in 4,400+ colours, inc. RAL, RAL...
£111.26 (incl. VAT)
£92.72 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
