Selemix 5-8016 2K WB Epoxy Primer

    5-8016
    SEL9256

    A Light Grey (RAL 7032), water-based, 2-pack primer with high filling and good anticorrosive properties, with good adhesion to a variety of substrates including Steel, Galvanised steel, Aluminium and Painted Surfaces.

    • Fast drying and easy to apply - Can be used with Selemix waterborne 2-pack topcoats
    • Recommended for use on industrial and agricultural equipment and machinery where a durable, low VOC or waterborne product is required
    • This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
    • Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
    • For Professional Use Only

    Please note: Colours shown are for illustrative purposes only

    Product Type
    Colour
    Size
    Finish
    £566.49(ex. VAT)
    £679.79 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Selemix 5-8016 2K WB Epoxy Primer is a Light Grey (RAL 7032), water-based, 2-pack primer with high filling and good anticorrosive properties, with good adhesion to a variety of substrates including Steel, Galvanised steel, Aluminium and Painted Surfaces.

    It is fast drying and easy to apply. It can be used with Selemix waterborne 2-pack topcoats.

    This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener. This product can be purchased as a Base or Hardener separately only - please see the drop down menu above.

    Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details.

    Note: 1.959.8450 (9-450) Hardener must be properly shaken before use.

    For Professional Use Only.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Water-based, 2-pack primer
    • Good adhesion to a variety of substrates including Steel, Galvanised steel, Aluminium and Painted Surfaces
    • It is fast drying and easy to apply
    • It can be used with Selemix Waterborne 2-pack Topcoats
    • This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
    • Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
    • For Professional Use Only



    Surface Preparation


    Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

    Steel:

    • Machine sand with P80-120 discs and degrease

    Galvanised Steel:

    • Abrade with SCOTCHBRITE® and degrease

    Aluminium:

    • Machine sand with P240-320 discs and degrease

    Painted Surfaces:

    • Machine sand with P240-320 discs and degrease



    Mixing


    • Thoroughly mix paint before activating and check colour before use
    • This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
    • Shake 9-450 Hardener well before use



    FeaturesConventional SprayAir-Assisted Airless

    By Weight:

    5-8016 Primer

    9-450 Hardener

    Water

    By Weight:

    1000

    170

    230-250

    By Weight:

    1000

    170

    60-150

    By Volume:

    5-8016 Primer

    9-450 Hardener

    Water

    By Volume:

    5

    1

    1.15-1.25

    By Volume:

    5

    1

    0.3-0.75

    Viscosity (at 20°C):

    30-40 secs DIN4

    After mixing allow to stand for at least 5 minutes before checking viscosity

    >60 secs DIN4

    After mixing allow to stand for at least 5 minutes before checking viscosity

    Pot Life (at 20°C): 1.5-2 hours1.5-2 hours



    Mixing Ratio:

    • Selemix 5-8016 2K WB Epoxy Primer
      • 5 parts base : 1 part hardener 

    Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant base and hardener/activator used.



    Application Notes


    FeaturesConventional SprayAirless Spray
    Spraygun Setup:

    Nozzle:

    Gravity: 1.6-1.8mm

    Suction: 1.8-2.0mm

    Pressure feed: 1.2-1.4mm

    Nozzle:

    9-11 thou

    0.23-0.28 mm

    Air Pressure:

    HVLP: 2 Bar

    Standard: 2.5-3 Bar

    2-3 Bar
    Fluid Pressure: N/A70-100 Bar
    Number of coats: 2-3 medium1 Light Dry + 1 Full
    Flash-off between coats:15 mins minimum at 20°C or until matt15 mins minimum at 20°C or until matt
    Drying: Air dry 5-6 hours or bake at 60°C for 50 minsAir dry 5-6 hours or bake at 60°C for 50 mins
    Flash-off before bake:  20 mins minimum at 20°C or until matt 20 mins minimum at 20°C or until matt
    Wet Film Thickness: 125-150 microns125-150 microns
    Dry Film Thickness:40-60 microns60-80 microns



    Please see the Product Data Sheet for detailed Application Instructions before use.



    Theoretical Coverage


    • 6.1-7.3 m² per litre at 50 microns DFT

    Note: Please see the Product Data Sheet for detailed information.



    Drying Times


    Drying Times 20°C
    Dust Free 15-20 min
    Touch Free 2-3 hour
    Hard Dry 24 hours
    Stoving50 minutes @60°C (according to film thickness) 
    Overcoating time

    Minimum: After bake, or after a minimum 5-6 hours air dry (depending on film thickness drying temperature)

    Maximum: 72 hours without sanding on clean surface with any Selemix Waterborne 2K epoxy or polyurethane topcoats

    Please Note: Lower temperature or film thickness higher than 80µm will extend drying times.

    The drying times quoted are approximate times and will vary depending on drying conditions and film thickness.

    Poor ventilation, temperature below 20°C, humidity above 85% RH and excessive film thickness will extend the drying times.





    Health & Safety


    • For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
    • THIS PRODUCT IS FOR PROFESSIONAL USE ONLY

    Product Details
    9256-946795

    Data sheet

    Manufacturer
    Selemix
    For Use By
    Professional Use
    Water / Solvent Based
    Water Based
    For Use On
    Steel
    Galvanised Steel
    Aluminium
    Painted Surfaces
    Sheen
    Matt
    Single, Two or Three Pack
    Two-Pack
    Mixing Ratio
    5 to 1
    Application
    Spray
    Airless Spray
    Pot Life (at 20°C)
    1.5-2 Hours
    UN Number (Activator)
    UN3082
    UN Number (Base)
    UN3082
    Hard Dry
    24 Hours
    Dust Dry (at 20°C)
    15-20 mins
    Colour(s)
    Standard Colours
    Base Type
    Water-Based
    Suitable For Use On
    Aluminium
    Suitable For Use On
    Galvanised Steel
    Suitable For Use On
    Steel
    Suitable For Use On
    Compatible Existing Coatings
    Substrate
    Aluminium
    Substrate
    Steel
    Substrate
    Painted / Primed Metal
    Usages
    High Corrosion Resistance
    Usages
    Atmospheric
    Usages
    Filling Properties
    Usages
    Low VOC
    Usages
    Anti-Corrosive
    Product Usage Type
    Primer
    Technologies
    2K
    Technologies
    Waterborne
    Application Methods
    Airmix
    Application Methods
    Conventional
    Application Methods
    Electrostatic
    Dry to Recoat (@ 20-25°C)
    6 hours
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Selemix 5-8016 2K WB Epoxy Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT