Rust-Oleum 9180 Epoxy Metal Primer is a fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal. It is the best fast drying primer for bare and galvanised metal under severe conditions.
Rust-Oleum 9180 Epoxy Metal Primer is designed for application on bare or blasted metal and can be recoated with Rust-Oleum 9100 topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moist conditions.
Features & Benefits
- Fast drying
- High film build; up to 100 microns dry in one coat is possible
- Easy to apply
- Excellent adhesion
- Easy mixing (1:1 ratio)
Please note: This product is recoatable with 9100 Epoxy topcoat and if good U.V. resistance is required, Rust-O-Thane Polyurethane Topcoat 9600 should be applied.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||7m² per litre|
|Touch Dry||1 Hour|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close