Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. From Jotun, this is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments.
Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. Complies with ASTM D520 type II zinc dust.
Approvals and certificates
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120°C.
Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 - System M20 and N4 (Cert. No. XM92/M20-140 and XN90/N4-077) Item 7.1.3.
Additional certificates and approvals may be available on request.
Typical use Protective: Suitable for structural steel and piping to be exposed to very high corrosive environments. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where extended durability is required.
Features & Benefits
Designed for protection in severe corrosive environments
Fast dry-to-recoat and fast-to-handle
All year round
Certified in systems for Norsok system 1
Surface treatment New construction: min. Sa 2½ (ISO 8501-1:2007) Maintenance: UHPWJ to WJ2 (NACE No.5/SSPC-SP 12)
“Green step” – Health, Environment and Safety Pure zinc dust (ASTM D520 type II)
Standards It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944/ISO 20340 and the zinc pigments complies with ASTM D520 type II zinc dust.
Water / Solvent Based
For Use On
Airless Spray, Brush
Standard / Ready Mixed
Single, Two or Three Pack
NORSOK M-501, Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, Low Flame Spread in accordance with EU Directive for Marine Equipment
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
SET 1 (Hand Tools)
1 x Rust-Oleum...