Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures.
Jotun Barrier 77
From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating.
Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating. It is a high zinc dust containing product that conforms to the compositional requirements of SSPC paint 20, level 2. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type I zinc dust.
Jotun Barrier 77 is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Designed as a primer in coating systems where extended durability is required.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 10m² per litre
- Touch Dry
- 10 mins
- Brush, Spray
Be the first to ask a question about this product!
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.
Rust-Oleum 769/780 Damp-Proof Rust Primer is a single pack rust primer for direct application on slightly moist or dry metal surfaces. Rust-Oleum 769/780 Damp-Proof Rust Primer is specially developed to be applied on hand tool prepared sound rusted steel surfaces.
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate. Advantages For Aluminium, Copper and Galvanised Steel surfaces. White in colour. Upto 12-months shelf life.
A high-Build zinc phosphate metal primer for new constructions and maintenance. Gives a good corrosion protection, excellent adhesion and increased application tolerance to a wide range of environmental conditions. Top Features Excellent corrosion protection Good chemical & abrasion resistance VOC compliant to current AIM regulations...
A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks...
Tor Elastaprime (RC100) is a high performance universal primer that provides excellent binding and adhesion to most substrates including plastics, wood, mineral substrates, ceramic tile, copper, zinc, brass, steel, galvanised steel, aluminium etc. Tolerant of low temperature/high humidity conditions. Used in conjunction with Tor Elastaseal, Elastadeck and...
A high performance primer with very good anti-corrosive properties for use on interior and exterior iron, steel and aluminium. Stronger than most basic DIY primers and is ideal in coastal areas.
Nu-Steel TP Primer/Undercoat is a two-part epoxy-based coating for use on properly prepared steelwork, such as bridges, railings, and even metallic artwork. Advantages Excellent opacity. Available in white, grey and buff. 10m²/Litre coverage. 12-month shelf life.
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
A rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc. Top Features Quick drying, White Spirit based alkyd primer May be topcoated with alkyd paints as recommended Can be thinned
A one component waterborne primer from Jotun that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning. It is fast drying making it suitable for stacking shortly after application. Jotun Muki AC is a one component physically drying waterborne acrylic coating.
A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. Top Features Protects steel galvanically Outstanding application properties Tough and abrasion resistant film
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Penguard Express ZP or Jotun Penguard HSP ZP as great alternatives. Jotun Penguard Special is a two component polyamide cured high molecular weight epoxy coating. It is a zinc phosphate pigmented, high build product specially...
A heavy duty, high build primer or intermediate coating for protection of steel in corrosive environments. Can be used on aluminium and galvanization. Top Features Fast overcoatable with 2K topcoats Excellent anti-corrosive properties Excellent flowability, also at low DFT Very good abrasion resistance