Cromadex 850 Two Pack Non-Isocyanate Acrylic Primer is a two pack non-isocyanate acrylic primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. Formulated without isocyanate helping to reduce health and safety concerns. Cromadex 850 can be applied wet-on-wet giving improved...
Jotun Barrier ZEP
This primer from Jotun is excellent in atmospheric environments, it provides corrosion protection as part of a complete coating system to carbon steel substrates.
Jotun Barrier ZEP is a two component polyamide cured zinc epoxy coating.
Jotun Barrier ZEP is a two component polyamide cured zinc epoxy coating. To be used as primer in atmospheric environments, it provides corrosion protection as part of a complete coating system. Suitable for properly prepared carbon steel substrates only. This product complies with ASTM D520 type I zinc dust.
Jotun Barrier ZEP is suitable for structural steel and piping to be exposed to corrosive environments. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 10m² per litre
- Touch Dry
- 10 mins
- Brush, Spray
Be the first to ask a question about this product!
Sherwin-Williams Mordant Wash L703 (formerly known as Leighs L703/Transgard TG155) is a blue mordant solution for application onto galvanized surfaces as a chemical pre-treatment to improve the adhesion of subsequent paint systems.
Jotun Penguard HSP ZP is a two component polyamide cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. To be used as a primer in atmospheric environments and is suitable for properly prepared carbon steel...
Sherwin-Williams Zinc Clad J984BS (formerly known as Epigrip J984BS) is a 2-pack epoxy zinc rich anti-corrosive protection primer for steel surfaces prepared by abrasive blast cleaning. It may also be used as a repair primer for galvanised surfaces.
This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Top Features Excellent immersion performance in water Suitable as a rust...
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.
A fast drying modified alkyd anti-corrosive primer for use as a general-use fast drying prefabrication or system primer on properly prepared ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004 Advantages Protects against corrosion on properly prepared steel Pigmented with zinc phosphate Touch dry in as little as an...
A quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use. Top Features May be diluted up to 20% 24 month shelf life High gloss finish
International Interplate 398 is a two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application. International Interplate 398 is intended to pre-prime steel prior to the fabrication process and can can be overcoated with a large range of coating systems.
Cromadex 230 Stoving Primer Filler is a stoving primer filler containing melamine giving improved durability. The product can be overcoated wet-on-wet enabling rapid application. Cromadex 230 Stoving Primer Filler is available in white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours.
Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is deal for a wide range of industrial structures or for touch up areas in the marine industry.
A high performance single pack water based rust converter for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Converts low level corrosion to an inert substrate for painting Suitable for...
Cromadex 2100 One Pack Universal Primer is a one pack primer containing zinc phosphate giving added corrosion resistance for greater durability. It is fast drying helping to improve productivity. It can be air dried or stoved giving flexibility in production. Available in white, grey, red oxide and buff as standard, it can also be tinted to ensure...
A fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal, also ideal for galvanised metal under severe conditions.
Cromadex 395 Anti-Corrosive Primer is an anti-corrosive primer containing zinc phosphate giving added corrosion resistance for greater durability. It is higher in solids giving superb opacity and coverage. The product has superb flow and levelling giving excellent topcoat appearance and can be used over sound existing paintwork, making it ideal for...