Jotun Muki Z 3000

Manufacturer:

Offers excellent corrosion protection of steel during normal storage and fabrication, and reduces exposure to fumes during welding and cutting compared with high zinc shop primers. Especially suitable for highly corrosive environments.

Bulk Buy

£138.72 tax excl.

Product Description

Jotun Muki Z 3000 is a two component inorganic medium zinc moisture curing zinc ethyl silcate coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning. It is fast drying and has good abrasion resistance making it suitable for stacking shortly after application.

Jotun Muki Z 3000 can be used as a temporary primer in new construction phases or as a primer in a complete coating system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates and recommended to be applied in an automated shop priming line. Compatible with advanced welding technologies including MIG, MAG and GFCAW.

Areas of Use
Marine: Suitable as a shop primer for entire vessels.
Protective: Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Approvals and certificates

  • Approved for PSPC for Water Balast Tanks acording to IMO Res. MSC 215(82)
  • Welding approved acording to DVS-guideline 0501
  • Type approved shop primer for Germanischer Lloyd
  • Type approved shop primer acording to PSPC IMO Res. MSC 82/W
  • Type approved shop primer by RMSR
  • Health approved for use as shop primer by FORCE institute

Additional certificates and approvals may be available on request.

Features & Benefits

  • Excellent corrosion protection: 8-10 months
  • Designed for protection in severe corrosive environments
  • Fast cutting and welding
  • Easy mixing

Product at a glance

  • Two component Medium Zinc Ethyl Silicate product 
  • Excellent corrosion protection: 8-10 months 
  • Fast cutting and welding 
  • High abrasion resistance 
  • Contains a combination of heat resistant ceramics and zinc 
  • Very little back-burning 
  • Small burn-out widths
  • Low content of zinc oxide in welding/cutting fumes

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)16m² per litre
Touch Dry1 minute
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.