Jotun Resist 86
Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product.
Specially designed by Jotun as a primer in coating systems where extended durability is required. It provides a solid foundation for the optimal performing coating system in the toughest exposures.
Jotun Resist 86 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 1, ISO 12944-4 and AS/NZS 3750.15 1994. It provides excellent corrosion protection as a single coat or as part of a complete coating system. It is heat resistant up to 540°C and is to be used as a primer in a coating system or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel substrates only, this product complies with ASTM D520 type I zinc dust.
Jotun Resist 86 is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where extended durability is required.
Approvals and certificates
- Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
- Tested by independent institute for static coefficient of friction.
Additional certificates and approvals may be available on request.
Features & Benefits
- Designed for protection in severe corrosive environments
- Fast dry to recoat and fast to handle
- All year around
- Two component moisture cured inorganic zinc rich ethyl silicate coating
- High zinc dust content
- Conforms to the compositional requirements of SSPC paint 20, level 1 Heat resistant up to 400 degrees Celsius
- Easy application
- Fast dry to recoat and fast to handle
- “Green step” – Health, Environment and Safety
- Pure zinc dust (ASTM D520 type II)
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 8.9m² per litre
- Touch Dry
- 15 mins
- Brush, Spray
Be the first to ask a question about this product!
Cromadex AQ58 One Pack Waterbased Acrylic Primer is a one pack waterbased acrylic primer for use over a wide range of substrates. Cromadex AQ58 is available in grey and white as standard, it can also be tinted to ensure complete coverage even on difficult lead free colours. Life expectancy of up to 3 years in a C2 external environment when used with a...
Cromadex 750 Two Pack Epoxy Primer is a two pack epoxy primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. The product can be air dried or stoved giving flexibility in production. It is available in white and grey as standard, it can also be tinted to ensure complete coverage...
A high solids and abrasion resistant coating which can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Top Features Low odor and low VOC Good chemical resistance Used as a primer, intermediate, or finish...
A high solids corrosion resistant primer or intermediate coat on concrete, steel and (in)organic zinc primers. Top Features Excellent corrosion protection. Excellent film build and edge protection. VOC compliant to current AIM regulations.
Nu-Steel® TP Etch Primer is a two pack primer giving excellent adhesion to metals prior to subsequent paint systems. Advantages Up to 8 years protection. Available in yellow or grey. 15m²/Litre approx. coverage rate. 12-month shelf life.
Jotun Penguard Express B11 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
International Interzinc 42 is a two component, metallic zinc primer designed for use in maintenance situations and as a primer at new construction. To be used as part of a coating system for structures in aggressive environments in a wide range of industries.
Rust-Oleum 769/780 Damp-Proof Rust Primer is a single pack rust primer for direct application on slightly moist or dry metal surfaces. Rust-Oleum 769/780 Damp-Proof Rust Primer is specially developed to be applied on hand tool prepared sound rusted steel surfaces.
PPG Dimetcote 9, an anticorrosive primer for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion. 2 component anti-corrosion primer Moisture-curing zinc (ethyl) silicate coating for structural steel Withstands substrate temperatures from –90°C...
Cromadex 903 Two Pack Chromate-Free Etch Primer is a two pack chromate-free etch primer designed for use over a wide range of substrates. It is formulated without the use of zinc tetroxy-chromate helping to reduce health and safety concerns. Cromadex 903 should be used to improve adhesion and corrosion resistance of all systems used over metal substrates.
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
A high performance two pack epoxy solvent based barrier primer for ferrous and non-ferrous metals, providing outstanding adhesion and excellent corrosion protection. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Suitable as a primer for a wide range of coatings Can be used in immersion conditions Conforms with...
A quick drying, White Spirit based alkyd topcoat with good light and weather resistance that is suitable for interior and exterior use. Top Features May be diluted up to 20% 24 month shelf life High gloss finish