Jotun Penguard Express B11 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
Jotun Resist 78
Specially designed as a primer in a coating system where extended durability is required. Jotun Resist 78 is a solid foundation for the optimal performing coating system in the toughest exposures.
Click here for more Jotun products.
Jotun Resist 78 is a two component moisture cured inorganic zinc ethyl silicate coating that is a fast curing, very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944-4. It provides excellent corrosion protection as part of a complete coating system. It is heat resistant up to 540°C. To be used as a primer in atmospheric environments for properly prepared carbon steel substrates only. This product complies with ASTM D520 type I zinc dust.
Jotun Resist 78 is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. Specially designed as a primer in coating systems where extended durabilty is required.
Approvals and certificates
- Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 °C.
- Tested by independent institute for static coefficient of friction
Additional certificates and approvals may be available on request.
Features & Benefits
- Designed for protection in severe corrosive environments
- Fast dry to recoat and fast to handle
- All year around
- All year around Certified in systems for Norsok system 1
- Two component moisture cured inorganic zinc rich ethyl silicate coating
- High zinc dust content
- Conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944/ISO 20340
- Heat resistant up to 400 degrees Celsius
- Easy application
- Fast dry to recoat and fast to handle
- “Green step” – Health, Environment and Safety
- Pure zinc dust (ASTM D520 type II)
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 9.6m² per litre
- Touch Dry
- 15 mins
- Brush, Spray
Be the first to ask a question about this product!
Nu-Steel Cladding Primer is a modified acrylic primer specifically developed for application for use on aluminium cladding, pre-fab buildings and industrial environments. Also ideal for Plastisol and polyester coated steel. Advantages Acrylic primer solution Excellent resistance to UV 12-month shelf life
A fast drying reputation isn't all International Intercure 200HS is renowned for. Complete with MIO, this Fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.
A water thinnable, general purpose metals primer which has very good anti-corrosive properties suitable for priming most metals including iron, steel, aluminium, brass, copper and more.
Cromadex 750 Two Pack Epoxy Primer is a two pack epoxy primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. The product can be air dried or stoved giving flexibility in production. It is available in white and grey as standard, it can also be tinted to ensure complete coverage...
Nullifire PM019 Primer for Blasted Steel Substrates is an anti-corrosive transport primer for temporary protection of blasted steel substrates, which will be finished with a compatible basecoat. Applied at standard film thickness, the protection in outdoor conditions is limited to approximately 3 months. Within this period of time the finishing coating...
Nullifire PM015 Aluminium Epoxy Primer is a high-build, low temperature curing modified aluminium epoxy mastic. Nullifire PM015 provides unequaled levels or barrier protection and corrosion resistance over existing finishes and rusted or St2/St3 cleaned steel.
Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.
Sherwin-Williams Transgard TG116 is a two pack epoxy undercoat for abraded surfaces. It is used for application onto suitably primed surfaces, as an undercoat for use under suitable high performance finishes.
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
International Interplus 356 is a low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C, 23°F), surface tolerant epoxy primer, metallic pigmented with aluminium and lamellar micaceous iron oxide for increased corrosion resistance.
Kem-Kromik M155 (formerly known as Sherwin-Williams M155 or Leighs M155) is a quick drying alkyd anticorrosive protective finish pigmented with zinc phosphate, used for protection of steel where speed of drying is important. Can be applied by aireless spray or roller, using a brush only for small areas or touching up.
Sherwin-Williams Macropoxy L425 is a two-pack epoxy zinc phosphate primer to use as anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. Recommended Systems Macropoxy Dura-plate Zinc Clad Epoxy Primers Zinc Clad Epoxy Buildcoats
A rust preventing primer. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc. Top Features Quick drying, White Spirit based alkyd primer May be topcoated with alkyd paints as recommended Can be thinned