Alternatively you can email our sales & support team on [email protected]
Jotun Penguard HSP ZP
0G7REDSVA
Jotun Penguard HSP ZP is a two component polyamide cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. To be used as a primer in atmospheric environments and is suitable for properly prepared carbon steel substrates.
Jotun Penguard HSP ZP is a two component polyamide cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. To be used as a primer in atmospheric environments and is suitable for properly prepared carbon steel substrates.
Jotun Penguard HSP ZP is suitable for structural steel and piping to be exposed to corrosive environments. Recommended for power plants, airports, buildings, refineries and mining equipment. Designed as a primer for Jotun's Steelmaster intumescent thin film passive fire protection coatings.
Approvals and certificates
Tested and approved as primer for Jotun Steelmaster thin film intumescent coatings.
Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, M21, N2 and N4 (Cert. No's. XM92/M20-166, XM92/M21-167, N1-115, XN90/N2-089, XN90/N4-090) Item 7.1.4.
Additional certificates and approvals may be available on request.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks.
Top Features
Excellent immersion performance in water
Suitable as a rust...
Specially designed as a primer in a coating system where extended durability is required. Jotun Resist 78 is a solid foundation for the optimal performing coating system in the toughest exposures.
Click here for more Jotun products.
PPG AquaCover 400 (also known as Sigma Aquacover 400) is a two-component, polyamine-cured, waterborne epoxy coating for steel structures in atmospheric exposure, touch dry in 90 minutes. Also suitable for concrete floors.
Top Features
Particularly suitable when solvents are not permitted because of health and safety reasons
Free from...
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
A specially-formulated primer for application on to metals to enhance adhesion properties, and allow the primer to physically bond onto the metal using an incorporated activating acid that "etches" into the substrate.
Advantages
For Aluminium, Copper and Galvanised Steel surfaces.
White in colour.
Upto 12-months shelf life.
Jotun Jotacote Universal N10 is specially designed as a universal, all round, all year, new building coating where fast dry to handle times are required. Jotun Jotacote Universal N10 can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments and is replacing the current Jotacote Universal product.
PPG SigmaZinc 105 is a two-component, zinc epoxy steel primer with excellent anti-corrosive and application properties.
Top Features
Quick-drying, can be overcoated after 25 minutes
Excellent application properties
Cures at temperatures down to -5°C (23°F)
Jotun Penguard Low Temp Additive is recommended when a faster curing or painting at lower substrate temperatures is desired with Penguard HB, Penguard Primer and Penguard Special.
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
A heavy duty, high build primer or intermediate coating for protection of steel in corrosive environments. Can be used on aluminium and galvanization.
Top Features
Fast overcoatable with 2K topcoats
Excellent anti-corrosive properties
Excellent flowability, also at low DFT
Very good abrasion resistance
Sherwin-Williams Macropoxy L574 (formerly known as Metagard L574) is a two-pack temporary protective primer for steel surfaces prepared by abrasive blast cleaning.
Tor QD Universal Primer prepares steel and dries quickly for overcoating in 1-2 hours with quick drying and conventional alkyd finishes.
An alkyd binder pigmented with inert inorganic pigments and thinned with an aromatic hydrocarbon solvent blend.
Not suitable for overcoating with chlorinated rubber or 2 pack finishes.
Good coverage...
Sherwin-Williams Macropoxy L674 (formerly known as Metagard L674/Transgard TG223) is a 2-pack epoxy zinc phosphate blast primer for carbon steel surfaces prepared by abrasive blast cleaning.
Sherwin-Williams Macropoxy C425V2 (formerly Epigrip C425V2) is a high build 2-pack epoxy zinc phosphate primer/buildcoat to provide anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. Network Rail and NORSOK approved, ideal for use in internal/external exposed conditions including offshore, petrochemical and...
ultrablast uk ltd on 24/08/2017
