Hempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.
Hempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.
Use as a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification. (As a finishing coat where a cosmetic appearance is of less importance). Also for repair and maintenance work at application temperatures above -10°C/15°F on hatch covers, decks, in cargo holds and ballast tanks etc. Hempadur 45143 is intended for use in cold/temperate climates.
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating.
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry.
Atmospheric medium
Hempadur 45143
Immersion
Hempadur 45143
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Tony on 2022-06-02 09:24:43 | Question: I am having trouble getting the Hempathane.topcoat to adhere to the hempadur. Any recommendations on how to apply? |
Answer from Rawlins’ Technical Team: Assuming the topcoat you are using is Hempathane HS 55610 the overcoating timings for applying are; 36 hours - 90 days @ -10°C 18 hours - 45 days @ 0°C 4 hours - 10 days @ 20°C | |
| Hayley on 2021-08-29 10:10:16 | Question: Ive been advised to use this on a car, how quickly can i respray if im wanting to lay down 2 or 3 coats? how long in-between? |
Answer from Rawlins’ Technical Team: Drying time between coats is 4 hours at 20°C - please note that as this is an epoxy it is not UV stable and as such shouldn;t be applied to areas exposed to sun light. | |
Hempel Hempadur 45143 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the productMore Information Delivery Info
£25.22 (incl. VAT)
£21.02 (ex. VAT)
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate.For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
£77.40 (incl. VAT)
£64.50 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products.Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
£34.38 (incl. VAT)
£28.65 (ex. VAT)
