Jotun Hardtop XPF
Manufacturer: Jotun
Jotun Hardtop XPF is a two component chemically curing aliphatic acrylic polyurethane coating that is fast drying and has a high solids content. It has a gloss finish with very good gloss retention and should be used as topcoat in atmospheric environments, it can also be applied at sub zero surface temperatures.
Product Description
Jotun Hardtop XPF is a two component chemically curing aliphatic acrylic polyurethane coating that is fast drying and has a high solids content. It has a gloss finish with very good gloss retention and should be used as topcoat in atmospheric environments, it can also be applied at sub zero surface temperatures.
Jotun Hardtop XPF is recommended for topside, deck and superstructure areas in the marine industry and recommended for offshore environments, refineries, power plants, bridges and buildings as well as a wide range of industrial structures in the industrial/protective sectors.
Approvals and certificates
- Used as a topcoat in fast drying pre-qualified NORSOK systems.
- NORSOK System 1, Rev.5
- Low flame spread certificate acording to IMO/Solas directive.
- Grain, Newcastle Ocupational Health
Additional certificates and approvals may be available on request.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Technical Data
| Typical Coverage (per coat) | 10m² per litre |
| Touch Dry | 1.5 hours |
| Application | Brush, Roller, Spray |
| The figures stated above are approximate. Please ensure you refer to all datasheets for full application information. | |
Download
Questions
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.
Close