Jotun Hardtop CA is a two component cross linked acrylic coating that does not contain isocyanates. It has a gloss finish with good gloss retention and is a high solids product. The product has good application properties with low dry spray which makes it ideal to be used as topcoat in atmospheric environments.
Used as a topcoat in pre-qualified NORSOK systems
Excellent alternative to a polyurethane topcoat
Good resistance to oils, solvents, chemicals and abrasion
Excellent flexibility
Very good water resistance
High gloss finish
Long lasting gloss and colour retention
Now available in 1,700+ colour options, including RAL, NCS, BS and Jotun Colours
Note: base 6 (and colours mixed on a base 6) is made to order - lead times apply
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Jotun Hardtop CA is a two component cross linked acrylic coating that does not contain isocyanates. It has a gloss finish with good gloss retention and is a high solids product. The product has good application properties with low dry spray which makes it ideal to be used as topcoat in atmospheric environments.
Jotun Hardtop CA is recommended for topside, deck and superstructure areas in the marine industry and recommended for offshore environments, refineries, power plants, bridges and buildings as well as a wide range of industrial structures in the industrial/protective sectors.
Jotun Hardtop CA is used as a topcoat over an epoxy primer where a durable, high gloss finish is required in aggressive atmospheric exposure.
Product Information
Used as a topcoat in pre-qualified NORSOK systems
Excellent alternative to a polyurethane topcoat
Good resistance to oils, solvents, chemicals and abrasion
Excellent flexibility
Very good water resistance
High gloss finish
Good gloss retention
Available in a wide range of colours
Long lasting colour retention
Approvals and certificates
Low flame spread certificate acording to BS 476 Part 6
Highways Agency Approved - Item No. 167
NORSOK System 1, Rev.5
Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 - System M20, M21, M24, N1, N2, N4 and N9 (Cert. No's. XM92/M20-166, XM92/M20-168, XM92/M21-167, XM92/M24-169, XM92/M24-170, XM92/M24-170, N1-115, XN90/N2-089, XN90/N4-090, XN90/N9-065) Item 7.3.4.
Additional certificates and approvals may be available on request.
Features & Benefits
Isocyanate free
Good chemical resistance
Good colour and gloss retention
Primers Hardtop CA will form a long lasting corrosion protection system together with primers like Barrier, Resist, Penguard and Jotacote for a wide range of purposes.
Chemical resistance Hardtop CA offers an isocyanate free good chemical resistance for structures exposed to heavy detergents and spill of chemicals.
No isocyanates The fact that this product does not contain any isocyanates makes it a preferred solution for HSE conscious customers.
NORSOK pre-qualification Hardtop CA is pre-qualified in several NORSOK coating sytems no. 1.
Product Details
1013-962864
Data sheet
Manufacturer
Jotun
For Use By
Professional Use
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Two-Pack
Single, Two or Three Pack
Two-Pack
Product Certifications
Network Rail Line Specification NR/L3/CIV/039, Low flame spread certificate acording to BS 476 Part 6, Highways Agency Approved - Item No. 167, NORSOK System 1, Rev.5
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi, I've been advised to use Hardtop to recoat inflatable tubes on my Rib boat. Can you tell me if this has the flexibility to adhere. Thanks
Answer from Rawlins’ Technical Team:
This product is normally used over a compatible primer on the topside, deck and superstructures on vessels not on RIB sponsons.
For this application assuming they are clean,dry, sound and prepared as detailed in the technical data sheet we can recommend Technispray Hypakolor, this is available in many RAL and BS colours.
Andrew Dennett on 2020-12-08 09:45:35
Question:
Can I re apply Jotamastic 90 over this in the future on a narrowboat?
Answer from Rawlins’ Technical Team:
Yes assuming the previous coat of Jotun Hardtop CA is prepared as detailed in the Technical Data Sheet it can be overcoated with Jotun Jotamastic 90 or another coat of the Jotun Hardtop CA.
Jotun Hardtop CA is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Jotun Thinner No. 7 is a paint thinner designed to improve the flow of a range of Jotun acrylic, vinyl and antifouling coatings. It can also be used as a cleaner of pumps and tools after and before painting.
More Information Delivery Info
Jotun Thinner No. 17 is a paint thinner designed to improve the flow of a range of Jotun epoxy products. It can also be used as cleaner of pumps and tools after and before painting.
Jotun Thinner No. 17 is specially suitable as a thinner for epoxies and similar type products except Tankguard series.
More Information Delivery Info
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3).
Please click here for important information about these kits.
Kit Contents:
SET 1 (Hand Tools)
1 x Rust-Oleum...