Jotun Pilot II

Jotun Pilot II is a one component oxidatively drying alkyd coating from Jotun that has a gloss finish with good gloss retention. To be used as a topcoat in atmospheric environments.

Jotun Pilot II is recommended as a topcoat, and for touch-up purposes for marine engines, topside, deck and superstructure areas and for a wide range of industrial structures.

  • Now available in 1,300+ colours, including RAL, NCS and BS

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
    Your customization:
Colour Group
Size
Finish
£22.80
VAT excluded

£27.36 Tax incl.
Quantity

Description

Jotun Pilot II is a one component oxidatively drying alkyd coating that has a gloss finish with good gloss retention. To be used as topcoat in atmospheric environments.

Jotun Pilot II is recommended as a topcoat, and for touch-up purposes for marine engines, topside, deck and superstructure areas and for a wide range of industrial structures.

Approvals and certificates

  • Low flame spread certificate acording to IMO/Solas directive
  • Grain, Newcastle Ocupational Health
  • Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids

Additional certificates and approvals may be available on request.

Features & Benefits

  • Reduces application cost
  • No special painting skills required
  • Nice finish

Reduces your application costs
Requires no mixing and has no pot life restrictions, which reduce time spent on preparation, waste, spillage and leftovers
No special painting skills required

Surface tolerant
Surface tolerant and excellent application properties regardless of which equipment you use
Can be applied to any surface of new or aged coatings in atmospheric conditions

Aesthetical appearance
Provides a high gloss finish that makes your coated surface look smooth, clean and appealing

Primers
Together with primers like Alkydprimer or Pilot QD Primer, Pilot II will form a low to medium corrosion protection system, respectively, as defined by ISO 12944.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Interior / Exterior Use
Interior and Exterior
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Single
Product Certifications
Grain - Newcastle Ocupational Health, Low flame spread certificate acording to IMO/Solas directive, Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
Pack Size
5L, 20L
Application
Brush, Roller, Spray
Coverage
9.6 to 16m² per litre
Touch Dry
3 hours
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions carly on 2018-01-27 21:31:41
Question: 

Good evening Is this particular paint ok to use on our fibre glass boat?

Answer: 

Only if existing alkyd (gloss) paints have been used previously and you are merely overcoating. New or old bare fibreglass/GRP surfaces need an epoxy primer as build up coats (normally 200um DFT) such as Jotun Penguard HB or Jotun Penguard Primer which are then often painted with another 2 pack such as polyurethane (Jotun Hardtop XP).


Question about the product

* Required fields
(read)
Send