Jotun Penguard FC
Manufacturer: Jotun
Jotun Penguard FC is a two component polyamide cured high molecular weight epoxy coating that has a semi gloss finish with fair gloss retention. It is a high solids product that can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. To be used as a topcoat in atmospheric environments.
Product Description
Jotun Penguard FC is a two component polyamide cured high molecular weight epoxy coating that has a semi gloss finish with fair gloss retention. It is a high solids product that can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. To be used as a topcoat in atmospheric environments.
Areas of Use
Marine: Recommended for all non immersed areas.
Protective: Suitable for a wide range of industrial structures.
Approvals and certificates
- Low flame spread certificate acording to IMO/Solas directive
- Grain, Newcastle Ocupational Health
Additional certificates and approvals may be available on request.
Features & Benefits
- High build
- Very good chemical resistance
- High volume solids
Primers
Jotun Penguard FC will form a long lasting corrosion protection system together with primers like Barrier, Resist, Jotamastic, Penguard and Jotacote for a wide range of purposes.
High build
A maximum DFT of 200 microns will provide you with a better barrier protection.
Chemical resistance
The epoxy binder ensures resistance against different types of chemicals, providing long lasting protection of your property.
High volume solids
High volume solids compared to traditional epoxy finish coats results in lower VOC (volatile organic compounds) per litre, and thus is a modern solution with low environmental impact.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Technical Data
| Typical Coverage (per coat) | 6.2m² per litre |
| Touch Dry | 2.5 hours |
| Application | Brush, Roller, Spray |
| The figures stated above are approximate. Please ensure you refer to all datasheets for full application information. | |
Download
Questions
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.
Close