Blackfriar Satin Black provides an attractive, soft black satin finish for interior and exterior wood and metal. Its durability makes it ideal for wrought-iron work, doors, skirting, gates and steel fabrications, as well as decorations, picture frames and more.
Preparation
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be abraded and degreased prior to direct application of Blackfriar Satin Black Paint. Remove any rust from ferrous metal to a clean bright surface before priming with Blackfriar Anti-Rust Primer. Galvanised metal should be degreased and primed with Blackfriar Multi-Surface Primer. New or other bare surfaces should be primed with the appropriate Blackfriar primer.
Application
Stir thoroughly prior to use with a broad stirrer. The product may be applied by brush, roller or spray. Two coats are recommended to give best protection.
Thinning
Maximum 5% white spirit.
Limitations
Do not use under cold (less than 5°C), damp or humid conditions. Not suitable for direct application to galvanised metal, use Blackfriar Multi-Surface Primer first.
Drying Time
Touch dry in 2 - 4 hours. Recoat after 16 hours and within 3 days. Drying times are based on an ambient temperature of 20°C and 50% relative humidity. Lower temperatures or higher humidity will prolong the drying and overcoating times.
Clean Up
Remove as much product as possible from application equipment before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Storage
Store in a dry, safe place. Do not store in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight.
Features
- For wood and metal
- Ideal for decorative work
- For interior and exterior use
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.