Cromadex 310 Low Bake Stoving Topcoat is a low bake stoving topcoat that contains melamine to give it a tough durable finish. The lower stoving schedule of the product can help in reducing overall heating costs. The unique resin and pigment technology used enables both a wide variety of applications and a durable finish. Available in all BS and RAL colours.
Ardenbrite Protective Glaze
A quick drying clear coating for use over Ardenbrite Metallic Paint. For all external applications and for increased durability on internal applications (if required).
Ardenbrite Protecive Glaze is an advanced clear coating used to protect the solvent based Ardenbrite Metallic Paint. Recently improved, it provides outstanding resistance to all weather conditions and excellent UV protection. Ideal where weather conditions are highly demanding, such as coastal applications.
Two coats of Ardenbrite Protective Glaze are normally required for external use. At least one coat of Protective Glaze must be applied within 2 hours of application of the Metallic Paint to ensure its protection. If required for internal use, one coat is normally sufficient.
Features & Benefits
- Quick drying
- Interior and exterior use
- For a highly durable finish
Note: Ardenbrite Protective Glaze Thinner has now been discontinued. Ardenbrite Protective Glaze is supplied ready for use and does not require thinning. A general cellulose based solvent can be used for any equipment cleaning that may be required after use.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 14m² per litre
- Touch Dry
- 1 hour
|Thomas McCaffery on 28/04/2016|| |
Question: Is this ok for cellulose paints.
We wouldn’t recommend using Ardenbrite Protective Glaze over any coating besides Ardenbrite Metallic Paint (Solvent Based) as it has no other intended uses. You may be better with something like Rust-Oleum 7500 Alkythane which provides a clear satin protective finish for previously painted metal surfaces.
SikaCor EG 5 is a two-pack topcoat based on polyurethane with good gloss and colour retention. By adding 1% b.w. of SikaCor PUR Accelerator (see product data sheet for more information) a faster touch-drying and full curing will be achieved. Features and Benefits Combined with 2-pack epoxy primer and intermediate coats: Very good...
Jotun Hardtop One is a one component moisture curing acrylic polysiloxane resin based coating. The product does not contain isocyanates, neither does it generate di-isocyanates during hotwork / welding or fire accidents. It has excellent gloss and colour retention. It is a high solids product. The product is fully recoatable at any stage of...
Bradite Poly Lacquer is a two-pack polyurethane, clear coating and finish lacquer, for steel, non-ferrous metals, wood, concrete & mineral substrates free of contamination, dust, efflorescence and properly prepared. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in more than 350 colours...
International Intergard 740 is a two component epoxy finish coat suitable for brush, roller and spray application, suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry.
Cromadex 600 Two Pack Polyurethane Topcoat is a two pack polyurethane topcoat with excellent exterior durability and chemical resistance. The product exhibits excellent colour and gloss retention adding value to the finished article. The addition of Cromadex 600 Rapidcure Accelerator can speed up the drying time helping improve productivity in...
Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures.
HMG C71 Speedline. A high quality '2 hour' drying time Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and outstanding film hardness and toughness. In addition, yellowing is minimal even after prolonged exposure to higher temperatures. Quick drying Agricultural Paint. Quick drying...
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
Cromadex Anti-Silicone Additive is designed to be added to selected Cromadex topcoats to aid paint application where silicone contamination may be present, helping to reduce coating rejection. The product can be used in Cromadex 222, 233, 400, 600 and 800 topcoats.
Sherwin-Williams Acrolon C750V2 (formerly known as Leighs C750V2) is an isocyanate free, two-pack finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable. Sherwin-Williams Acrolon C750V2 is normally used in conjunction with epoxy primers and undercoats and...
Cromadex 742 Two Pack Epoxy Medium Texture Topcoat is a two pack epoxy medium texture topcoat with excellent chemical resistance for interior use only. The product offers a medium texture appearance for an aesthetic finish. The product can be air dried or stoved enabling flexibility in production. Available in a wide range of colours and gloss...
Cromadex 234 One Pack Air Drying Alkyd Fine Texture Topcoat is a one pack air drying topcoat that comes in a fine texture finish that adds value to your product. The product has a long wet edge that enables a seamless finish on large articles without dry spray. Available in the full Cromadex range of colours, including BS, RAL and special...
Jotun Se-lett is a one component oxidatively drying alkyd coating that has a matt finish and is a specially designed bright colour to be used as mid coat as part of a complete system in atmospheric environments. Jotun Se-lett is recommended for warning signs and as a signal colour.
HMG Acrythane XSC21 is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties. Rapid Drying High Gloss Simplicity Of Use Excellent protection against harsh weather conditions and atmospheric pollution. Click to jump down to Technical Data
Jotun Marathon 550 is a two component polyamine cured epoxy coating for carbon steel, galvanised, stainless steel, aluminium and concrete substrates as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Recommended for use in offshore environments, refineries, power plants, bridges, buildings,...