Jotun Hardtop AX

Manufacturer:

Jotun Hardtop AX is a two component chemically curing aliphatic acrylic polyurethane coating that has a high gloss finish with very good gloss retention. It has good chemical resistance and is a high solids product. It should be used as a topcoat in atmospheric environments.

Jotun Hardtop AX is recommended for topside, deck and superstructure areas in the marine industry.

Bulk Buy

£58.53 tax excl.

Select a different colour

Close colour picker

Product Description

Jotun Hardtop AX is a two component chemically curing aliphatic acrylic polyurethane coating that has a high gloss finish with very good gloss retention. It has good chemical resistance and is a high solids product. It should be used as a topcoat in atmospheric environments.

Jotun Hardtop AX is recommended for topside, deck and superstructure areas in the marine industry and offshore environments, refineries, power plants, bridges and buildings in the protective industry.
Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.

Approvals and certificates

  • APAS approved to specification 2911

Additional certificates and approvals may be available on request.

Features & Benefits

  • Very good colour and gloss retention
  • Very good chemical resistance
  • High sag resistance and minimal spray dust
  • Curing at low temperatures
  • Does not contain solvents defined as HAPs (according to EPA)

Robust and reliable finish
The ultimate combination of strong mechanical properties, strong chemical resistance, low dirt pickup and very good colour- and gloss retention, ensures a nice finish that lasts.

Easy to use
Hardtop AX is user friendly and easy to get right due to:
Easy to prepare, high sag resistance, low level of spray dust, minimal odour, consistent gloss.

HSE
High volume solids compared to traditional polyurethanes results in low VOC (volatile organic compounds) per litre, making it a modern topcoat with low environmental impact. In addition, Hardtop AX is Xylene free and does not contain any solvents defined as HAPs (hazardous air pollutants).

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)9m² per litre
Touch Dry1 Hour
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable